{"id":5498,"date":"2026-10-29T17:10:30","date_gmt":"2026-10-29T09:10:30","guid":{"rendered":"https:\/\/www.corvelanmag.com\/?p=5498"},"modified":"2026-10-30T12:35:53","modified_gmt":"2026-10-30T04:35:53","slug":"difference-between-metal-detector-and-magnetic-separator","status":"publish","type":"post","link":"https:\/\/www.corvelanmag.com\/es\/difference-between-metal-detector-and-magnetic-separator\/","title":{"rendered":"Detector de metales o separador magn\u00e9tico: \u00bfcu\u00e1l necesita su transportador?"},"content":{"rendered":"\n<style>\n.cv-conveyor-guide{--cv-ink:#1f2937;--cv-link:#174a3f;--cv-soft:#f4f5f4;--cv-line:#d6dcd8;color:var(--cv-ink);font-family:inherit;font-size:17px;line-height:1.75;min-width:0;overflow-wrap:break-word}\n.cv-conveyor-guide,.cv-conveyor-guide section,.cv-conveyor-guide nav,.cv-conveyor-guide details,.cv-conveyor-guide .cv-table{box-sizing:border-box}\n.cv-conveyor-guide section{padding:22px;margin:0 0 24px;border:1px solid var(--cv-line);border-top:4px solid #374151;border-radius:16px;background:#fff;min-width:0;scroll-margin-top:110px}\n.cv-conveyor-guide h2{font-size:30px;line-height:1.3;margin:0 0 16px;color:var(--cv-ink)}\n.cv-conveyor-guide h3{font-size:24px;line-height:1.35;margin:26px 0 12px;color:var(--cv-ink)}\n.cv-conveyor-guide p{margin:0 0 16px}\n.cv-conveyor-guide p:last-child{margin-bottom:0}\n.cv-conveyor-guide strong{font-weight:700}\n.cv-conveyor-guide a{color:var(--cv-link);text-decoration:underline;text-underline-offset:3px}\n.cv-conveyor-guide a:focus-visible,.cv-conveyor-guide summary:focus-visible,.cv-conveyor-guide .cv-table:focus-visible{outline:3px solid #111827;outline-offset:4px}\n.cv-conveyor-guide .cv-summary{background:var(--cv-soft)}\n.cv-conveyor-guide nav{padding:18px 22px;margin-bottom:24px;background:var(--cv-soft);border:1px solid var(--cv-line);border-radius:12px}\n.cv-conveyor-guide summary{cursor:pointer;font-weight:700;line-height:1.5;list-style:none;padding-right:28px;position:relative}\n.cv-conveyor-guide summary::-webkit-details-marker{display:none}\n.cv-conveyor-guide summary::after{content:'+';position:absolute;right:0;top:0;font-size:22px;line-height:1.2}\n.cv-conveyor-guide details[open]>summary::after{content:'\u2212'}\n.cv-conveyor-guide nav ul{padding-left:24px;margin:16px 0 0}\n.cv-conveyor-guide nav li{margin:0 0 8px}\n.cv-conveyor-guide .cv-table{overflow-x:auto;margin:20px 0;border:1px solid var(--cv-line);border-radius:8px}\n.cv-conveyor-guide table{border-collapse:collapse;width:100%;min-width:620px;font:inherit;text-align:left}\n.cv-conveyor-guide th,.cv-conveyor-guide td{padding:12px 14px;vertical-align:top;border-bottom:1px solid var(--cv-line)}\n.cv-conveyor-guide th{background:var(--cv-soft);font-weight:700}\n.cv-conveyor-guide tr:last-child td{border-bottom:0}\n.cv-conveyor-guide ol{padding-left:25px;margin:18px 0}\n.cv-conveyor-guide ol li{margin-bottom:16px;padding-left:4px}\n.cv-conveyor-guide .cv-media{display:block;margin:22px 0;clear:both}\n.cv-conveyor-guide .cv-media img{display:block;max-width:100%;height:auto;border-radius:8px}\n.cv-conveyor-guide .cv-cta{display:inline-block;background:#1f2937;color:#fff;padding:13px 20px;border-radius:8px;text-decoration:none;font-weight:700;line-height:1.5;overflow-wrap:anywhere}\n.cv-conveyor-guide .cv-faq details{padding:18px 0;border-top:1px solid var(--cv-line)}\n.cv-conveyor-guide .cv-faq details p{margin:14px 0 0}\n@media(max-width:768px){.cv-conveyor-guide{font-size:16px}.cv-conveyor-guide section{padding:18px;margin-bottom:18px;border-radius:12px;border-top-width:3px}.cv-conveyor-guide h2{font-size:24px}.cv-conveyor-guide h3{font-size:20px}.cv-conveyor-guide nav{padding:18px;margin-bottom:18px}.cv-conveyor-guide .cv-cta{display:block;text-align:center}.cv-conveyor-guide th,.cv-conveyor-guide td{padding:10px 12px}}\n<\/style>\n<article class=\"cv-conveyor-guide\" lang=\"en\">\n<section id=\"quick-summary\" class=\"cv-summary\"><h2>Quick Summary<\/h2>\n<p><strong>A magnetic separator removes metal that responds strongly enough to its magnetic field. A conveyor metal detector finds a target and sends a signal for an alarm, stop, or reject action.<\/strong> Use a magnet for recurring iron removal, a detector with a working removal response for other metal hazards, and both when your conveyor needs both jobs.<\/p>\n<p>The difference between metal detector and magnetic separator systems is therefore more than the metal they handle: it is what happens to the contamination. An alarm still leaves metal on the belt. A magnet needs to capture it and discharge it clear of the clean material.<\/p>\n<\/section>\n<nav aria-label=\"Conveyor metal control guide sections\"><details><summary>In this guide<\/summary><ul><li><a href=\"#main-difference\">What is the difference between a metal detector and a magnetic separator?<\/a><\/li><li><a href=\"#metal-types\">Which metals can each system handle?<\/a><\/li><li><a href=\"#choose-equipment\">Which option should your conveyor use?<\/a><\/li><li><a href=\"#installation-order\">Should the magnet come before or after the metal detector?<\/a><\/li><li><a href=\"#conveyor-conditions\">What conveyor conditions change the choice?<\/a><\/li><li><a href=\"#system-test\">How do you test the complete conveyor protection system?<\/a><\/li><li><a href=\"#compare-costs\">Which costs should you compare?<\/a><\/li><li><a href=\"#choose-by-task\">Choose by the metal and the action your line needs<\/a><\/li><li><a href=\"#faqs\">Conveyor metal detector and magnetic separator FAQs<\/a><\/li><\/ul><\/details><\/nav>\n<section id=\"main-difference\"><h2>What is the difference between a metal detector and a magnetic separator?<\/h2>\n<div class=\"cv-media\"><img loading=\"lazy\" src=\"https:\/\/www.corvelanmag.com\/wp-content\/uploads\/2026\/09\/coverlan-gjt-f-metal-detector-conveyor-hero.webp\" alt=\"Rectangular detector frame surrounding an inclined conveyor belt\" width=\"1200\" height=\"900\" loading=\"lazy\" decoding=\"async\" style=\"display:block;max-width:100%;height:auto;object-fit:contain;\"><\/div>\n<p><strong>Magnetic separation physically changes the metal\u2019s path; metal detection identifies a metal event so the line can respond.<\/strong> Neither function should be confused with the other when you specify conveyor protection.<\/p>\n<p>An overhead magnet pulls suitable unwanted iron or steel out of the material. These pieces are often called <em>tramp iron<\/em>. A self-cleaning belt carries the captured pieces away. A manual-clean magnet holds them until a planned cleaning operation removes them.<\/p>\n<p>A typical conveyor detector uses an electromagnetic sensing field. A passing metal target changes the received signal. The controller then operates an output. Physical removal needs a separate action, such as a diverter, a product reject unit, or a stopped belt from which the metal can be safely retrieved.<\/p>\n<div class=\"cv-table\" role=\"region\" aria-label=\"What you need to compare comparison\" tabindex=\"0\"><table><thead><tr>\n<th scope=\"col\">What you need to compare<\/th>\n<th scope=\"col\">Magnetic separator<\/th>\n<th scope=\"col\">Conveyor metal detector<\/th>\n<\/tr><\/thead><tbody>\n<tr><td>Main job<\/td><td>Capture and separate suitable magnetic metal<\/td><td>Detect a specified target and trigger a response<\/td><\/tr>\n<tr><td>What leaves the main stream<\/td><td>Captured metal, sometimes with attached material<\/td><td>Whatever the stop-and-remove or reject arrangement removes<\/td><\/tr>\n<tr><td>Recurring iron<\/td><td>Self-cleaning designs can discharge it during production<\/td><td>Repeated events can cause repeated stops or rejects<\/td><\/tr>\n<tr><td>Non-magnetic metal<\/td><td>An ordinary suspended iron-removal magnet does not attract it<\/td><td>A suitable detector can find it within its tested target range<\/td><\/tr>\n<tr><td>What to demonstrate<\/td><td>Capture, retention, and discharge at the working conditions<\/td><td>Detection plus the complete stop, mark, or reject action<\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p><strong>A detector supplied with a reject unit can remove contaminated material automatically.<\/strong> In that assembly, the sensor finds the metal and the reject mechanism does the removal. The equipment name alone does not tell you which parts are included.<\/p>\n\n<\/section>\n<section id=\"metal-types\"><h2>Which metals can each system handle?<\/h2>\n<p><strong>Magnets remove sufficiently magnetic iron, steel, and some stainless steel. Suitable detectors can find ferrous and non-ferrous targets within their tested size range.<\/strong> Define the contaminant\u2019s size, shape, and likely position in the material. \u201cDetects metal\u201d and \u201cstrong magnet\u201d are too broad to describe the job.<\/p>\n<div class=\"cv-table\" role=\"region\" aria-label=\"Metal in your feed comparison\" tabindex=\"0\"><table><thead><tr>\n<th scope=\"col\">Metal in your feed<\/th>\n<th scope=\"col\">Magnetic removal<\/th>\n<th scope=\"col\">Detection and next action<\/th>\n<\/tr><\/thead><tbody>\n<tr><td>Iron and ordinary carbon steel<\/td><td>Usually the first removal option to assess; capture still depends on distance, burial, size, and shape<\/td><td>A suitable detector can trigger removal of pieces that remain<\/td><\/tr>\n<tr><td>Aluminum, copper, or brass<\/td><td>Ordinary suspended iron-removal magnets do not attract these metals<\/td><td>Specify the actual metal and target size, then prove detection and rejection or stopping<\/td><\/tr>\n<tr><td>Stainless steel<\/td><td>Response varies with grade and condition; some pieces are strongly magnetic, others weakly magnetic or effectively non-magnetic<\/td><td>Select and test for the particular stainless target and surrounding material<\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p>Some stainless wear particles become more magnetic after working or deformation. <a href=\"https:\/\/www.eriez.com\/Products\/Metals-Recycling\/Nonferrous-Recovery\/Stainless-Steel-Separator\" rel=\"nofollow noopener\" target=\"_blank\">Specialized high-intensity separators<\/a> can exploit that response at close range. <strong>That does not make a standard overband magnet an all-stainless-steel separator.<\/strong> The target must still be reachable and responsive enough to be pulled out.<\/p>\n<p>Detector designs also differ. Some bulk-conveyor units focus on ferrous tramp metal and difficult contaminants such as manganese steel. Others are designed for ferrous and non-ferrous targets. A claim for one detector cannot set the detection range for another.<\/p>\n<p>For continuous aluminum or copper recovery from a recycling stream, consider a dedicated non-ferrous separation stage. An <a href=\"https:\/\/www.eriez.com\/Products\/Metals-Recycling\/Nonferrous-Recovery\/Eddy-Current-Separators\" rel=\"nofollow noopener\" target=\"_blank\">eddy current separator<\/a> uses a changing magnetic field to induce currents and repel suitable conductive particles. It performs a different job from an ordinary suspended magnet or a detector that stops the belt.<\/p>\n<\/section>\n<section id=\"choose-equipment\"><h2>Which option should your conveyor use?<\/h2>\n<p><strong>Choose continuous magnetic removal for recurring, magnetically responsive iron; choose detection with a defined stop or reject action for metal that needs a different response. Use both when those needs overlap.<\/strong> The following situations give you a practical starting point.<\/p>\n<h3>Recurring nails, bolts, and steel scrap<\/h3>\n<div class=\"cv-media\"><img loading=\"lazy\" src=\"https:\/\/www.corvelanmag.com\/wp-content\/uploads\/2026\/09\/cross-belt-magnetic-separator-hero-202609201742-88d91d.webp\" alt=\"Self-cleaning cross-belt separator with an endless belt, side plates and drive motor\" width=\"1200\" height=\"900\" loading=\"lazy\" decoding=\"async\" style=\"display:block;max-width:100%;height:auto;object-fit:contain;\"><\/div>\n<p><strong>Start with a self-cleaning magnet when repeated ferrous contamination would otherwise cause frequent stops.<\/strong> Its cleaning belt discharges captured iron during operation, provided the magnet can reach and lift the target through the material.<\/p>\n<p>Our <a href=\"https:\/\/www.corvelanmag.com\/products\/overband-magnetic-separator\/\">overband magnetic separators<\/a> cover this type of continuous iron-removal task. For a cross-belt arrangement, compare the <a href=\"https:\/\/www.corvelanmag.com\/products\/self-cleaning-cross-belt-permanent-magnet-separator\/\">RCYD(C) self-cleaning permanent magnet series<\/a>. Leave room beside the conveyor for the extracted iron and its collection bin; throwing it onto another clean conveyor simply moves the problem.<\/p>\n<p>If captured iron builds up slowly and a planned cleaning stop is practical, a manual-clean option may be sufficient. Our <a href=\"https:\/\/www.corvelanmag.com\/products\/suspended-electromagnetic-separator\/\">RCDB suspended electromagnetic separator<\/a> is a manual-clean configuration. It needs power for its magnetic field, and cleaning must be planned so released iron stays out of the product stream.<\/p>\n<h3>Occasional mixed-metal hazards before a crusher or mill<\/h3>\n<p><strong>Start with a detector and an effective removal response when hazardous pieces may be non-magnetic or unsuitable for magnetic lifting.<\/strong> A copper component, a weakly magnetic wear part, or a large embedded object may need the belt stopped rather than an overhead magnet alone.<\/p>\n<p>Our <a href=\"https:\/\/www.corvelanmag.com\/product-category\/conveyor-metal-detector\/\">conveyor metal detector range<\/a> provides different installation arrangements. Choose from the required target and line action as well as the belt dimensions. For a stop-and-retrieve arrangement, include a way to locate the contaminated belt section and safe access to remove the object.<\/p>\n<h3>Recurring iron plus a need to catch remaining metal<\/h3>\n<p><strong>Use a magnet and detector together when the magnet should remove routine iron while a separate check handles residual hazards.<\/strong> This is useful for mixed recycling feed or bulk material with both regular ferrous pieces and occasional other metal.<\/p>\n<p>Keep an existing magnet if it already performs its iron-removal job. Add the missing detection and line response. If it misses buried iron, first improve capture conditions; adding a detector can reveal remaining metal, but it does not correct poor magnetic removal.<\/p>\n<\/section>\n<section id=\"installation-order\"><h2>Should the magnet come before or after the metal detector?<\/h2>\n<p><strong>For routine iron removal followed by a check for remaining metal, place the magnet upstream of the detector.<\/strong> Both stages must act before the material reaches the machine or product point you want to protect.<\/p>\n<p>This order removes much of the recurring ferrous contamination first. The detector then checks what continues down the line. It can trigger action for metal outside the magnet\u2019s capture capability or for a target that escaped removal. The removed-iron chute should bypass the detector\u2019s product path and stay clear of its sensitive area.<\/p>\n<p><strong>A detector can also sit before an electromagnet when the system is <a href=\"https:\/\/www.eriez.com\/Products\/Metal-Detection\/Pulse-Induction-Metal-Detection\/1200-Series-Metal-Detectors\" rel=\"nofollow noopener\" target=\"_blank\">specifically designed to use its signal to control the magnet<\/a>.<\/strong> That arrangement needs matched detection, travel timing, magnet response, and separate handling of non-magnetic or oversized targets. It is a control-system choice, not a reason to move any detector ahead of any magnet.<\/p>\n<p>Leave space for stable detection as well as the physical equipment. A nearby magnet, moving cleaning belt, steelwork, drive motor, or power cable may affect detector operation. Use the <a href=\"https:\/\/www.eriez.com\/Documents\/Literature\/IOMs\/Metal-Detection\/MMDG-1220-Digital-Eriez-Model-1220-Metal-Detector-IOM.pdf\" rel=\"nofollow noopener\" target=\"_blank\">detector\u2019s installation drawings<\/a> to set the surrounding clear area, then test with nearby equipment running through its normal states. There is no single magnet-to-detector spacing suitable for every design.<\/p>\n<p>Also mark any transfer chute or machine between the two stages. If metal can be introduced after the detector, that later section needs its own protection decision. A good device in the wrong location leaves part of the process unchecked.<\/p>\n<\/section>\n<section id=\"conveyor-conditions\"><h2>What conveyor conditions change the choice?<\/h2>\n<p><strong>Use the deepest normal material layer, the hardest relevant metal target, and the real belt construction when comparing equipment.<\/strong> An empty-belt demonstration does not reproduce a target buried in a full load.<\/p>\n<h3>Material depth and distance to the target<\/h3>\n<p>For an overhead magnet, measure the gap to the top of the material and the full depth of the layer, often called <em>burden depth<\/em>. Iron near the bottom lies farther from the magnet and must move through more material. Dense packing or trapped pieces can make lifting harder.<\/p>\n<p>If increasing production makes the layer deeper, improve feed distribution or compare another separator size or installation position. Do not assume the same surface Gauss reading means the magnet will reach farther. At a discharge point, the opening material stream may offer a different capture opportunity from a packed layer on the belt.<\/p>\n<p>A detector also needs to find targets throughout the required inspection area. For aperture designs, an unnecessarily large opening can weaken small-target detection. For an underbelt design, a target near the top of a deep load may be too far from the sensor. <strong>Mechanical fit and detection performance are separate checks.<\/strong><\/p>\n<h3>Belt, material background, and surroundings<\/h3>\n<p>Read the belt specification for steel cords, metal fasteners, and repair splices. Photograph the actual splice; \u201crubber belt\u201d does not describe what is inside it. A split-frame detector may simplify installation without cutting the belt, while still needing a suitable solution for metal within that belt.<\/p>\n<p>Moisture, conductivity, or <a href=\"https:\/\/www.eriez.com\/Documents\/Literature\/IOMs\/Metal-Detection\/MM-1250-E1-Digital-Eriez-Model-1250-E1-Metal-Detector-IOM.pdf\" rel=\"nofollow noopener\" target=\"_blank\">magnetic minerals<\/a> can change the detector\u2019s background signal. Compare the relevant loaded conditions instead of reducing sensitivity until alarms disappear. Nearby moving steel, vibration, motors, and drives can also create unstable signals. Fix the installation cause where possible, then repeat the target test at the required setting.<\/p>\n<\/section>\n<section id=\"system-test\"><h2>How do you test the complete conveyor protection system?<\/h2>\n<p><strong>Test magnetic capture, metal detection, and the final removal action separately, then prove that they work together under loaded operating conditions.<\/strong> A light on the control panel is only one part of the result.<\/p>\n<ol>\n<li><strong>Define the targets.<\/strong> Record metal type, dimensions, shape, and where each target could sit in the load. Include the smallest required target and the most damaging credible object. For wire or flat pieces, include relevant orientations rather than relying only on a test sphere.<\/li>\n<li><strong>Test magnetic removal.<\/strong> Use controlled, recoverable samples at agreed positions and material depths. Record how many were introduced, captured, discharged, and left in the main stream. Inspect whether useful material leaves with the iron. A missed target should lead to a change in feed presentation, working distance, or separator selection, followed by another test.<\/li>\n<li><strong>Test the detector with each required metal.<\/strong> Keep belt speed, material condition, target position, and settings in the record. Include the difficult normal condition identified during selection. Do not send an uncontained test piece toward an operating crusher; use a controlled commissioning procedure with downstream recovery arranged.<\/li>\n<li><strong>Follow the target to its final destination.<\/strong> Demonstrate that the conveyor stops in time or the reject mechanism sends the affected material into the correct container. Include successive events and speed changes where these occur in production. Record the actual retrieval or reject result, not just the relay output.<\/li>\n<li><strong>Test the control response to faults.<\/strong> Under the agreed commissioning procedure, demonstrate the specified response to detector faults, a failed reject action, or loss of magnet power where relevant. Assign responsibility for the detector output, conveyor controls, reject mechanism, and restart sequence.<\/li>\n<\/ol>\n<p>Stop and isolate equipment before reaching into the conveyor or retrieving trapped metal. Keep trial samples accounted for so testing does not add contamination to the line.<\/p>\n<h3>Allow for detection delay and loaded stopping distance<\/h3>\n<p><strong>The target keeps moving while the controls react and the belt slows down.<\/strong> Measure stopping travel with the conveyor loaded, rather than using only an unloaded motor-stop time.<\/p>\n<p>For example, suppose belt speed is <strong>1.5 m\/s<\/strong>, the delay from detection to the stop command is <strong>0.2 s<\/strong>, and measured belt travel after that command is <strong>1.8 m<\/strong>. Travel from detection to standstill is:<\/p>\n<p><strong>1.5 \u00d7 0.2 + 1.8 = 2.1 m.<\/strong><\/p>\n<p>A protected transfer only 2 m downstream would be too close under those assumptions. Move detection upstream, improve the stopping arrangement, or use an effective reject system. The final layout also needs allowance for measured variation and any movement of material relative to the belt. The 2.1 m result is the example\u2019s travel distance, not a universal installation clearance.<\/p>\n<\/section>\n<section id=\"compare-costs\"><h2>Which costs should you compare?<\/h2>\n<p><strong>Compare complete systems that meet the same metal-control target, including installation, line response, downtime, and material loss.<\/strong> Comparing a bare detector with a complete self-cleaning magnet misses much of the cost.<\/p>\n<p>A detector quote may need a reject mechanism, marking device, conveyor-control work, or changes around the sensing area. A magnet installation may need suspension steelwork, a discharge chute, a collection bin, and safe cleaning access. A permanent magnet needs no electrical supply to create its field, but a self-cleaning unit still uses power for its cleaning belt. An electromagnet also needs power for the magnetic field.<\/p>\n<p>Reject timing can materially change operating loss. Suppose a uniform bulk flow is <strong>60 t\/h<\/strong> and a diverter rejects the whole stream for <strong>2 seconds<\/strong> per event:<\/p>\n<p><strong>Rejected mass = 60 \u00d7 2 \u00f7 3,600 = 0.0333 t, or about 33.3 kg per event.<\/strong><\/p>\n<p>At the same flow, a 0.5-second window would divert about 8.3 kg. The 25 kg difference shows why timing matters, but the shorter window is useful only if it still removes the target reliably. These are total diverted quantities; weigh the rejected material to determine the actual loss of saleable product.<\/p>\n<p>For stop-and-retrieve operation, record event frequency, search time, retrieval time, and restart time instead. If frequent ferrous events dominate those stops, a properly matched self-cleaning magnet upstream may reduce that workload. Rare but damaging non-magnetic objects still need an effective response.<\/p>\n<\/section>\n<section id=\"choose-by-task\"><h2>Choose by the metal and the action your line needs<\/h2>\n<p><strong>Use magnetic separation for suitable recurring iron, detection with a working stop or reject response for other specified metal hazards, and both when the conveyor needs continuous removal plus a check for remaining metal.<\/strong> That is the practical difference between metal detector and magnetic separator systems.<\/p>\n<p>Choose from the target and loaded operating conditions, then prove the final destination of the contamination. A stronger magnet does not replace non-magnetic metal detection, and a detector does not replace the mechanism or procedure that removes the metal.<\/p>\n<p>Send us your material, normal and maximum burden depth, belt width and speed, belt construction, and photos or dimensions of the metal you need to control. Include a conveyor sketch showing the protected machine and available stop or reject distance. Use our contact form to discuss the Corvelan detector, magnetic separator, or combined arrangement that fits the job.<\/p>\n<p><a class=\"cv-cta\" href=\"https:\/\/www.corvelanmag.com\/contact-us\/\">Get a Conveyor Protection Recommendation<\/a><\/p>\n<\/section>\n<section id=\"faqs\" class=\"cv-faq\"><h2>Conveyor metal detector and magnetic separator FAQs<\/h2>\n<details><summary>Can a conveyor metal detector replace a magnet for fine iron dust?<\/summary><p><strong>Do not make that replacement unless the detector can find the required fine-iron target in the real material.<\/strong> Very small magnetic particles may need a separator that brings them close to a strong field, such as a suitable grate, drum, or high-intensity arrangement. A large overhead magnet and a detector sized for damaging tramp objects address different conditions. Define the particle size and product-quality target before changing the equipment.<\/p><\/details>\n<details><summary>Why does the detector still alarm after an overband magnet?<\/summary><p><strong>First identify what the detector is responding to: escaped iron, another metal, or an installation or material signal.<\/strong> Retain the recovered object and note the load depth and operating state. Escaped iron points back to capture distance, burial, or discharge performance. A non-magnetic object needs a detection-and-removal response. Events repeating at the belt splice or a nearby machine cycle call for a belt or installation investigation before changing sensitivity.<\/p><\/details>\n<details><summary>Can I keep a steel-cord belt or metal belt fasteners?<\/summary><p><strong>Possibly, but the detector must be selected and tested for that belt construction.<\/strong> Some systems accommodate steel cords or metal splices; others need different belt details. Where clip compensation reduces sensitivity during a splice passage, include the required target at that passage in the commissioning test. A split-frame design makes mechanical fitting easier; it does not by itself solve the belt\u2019s electrical or magnetic effect.<\/p><\/details>\n<details><summary>What if the metal is embedded inside a lump or plastic part?<\/summary><p><strong>A suitable detector may identify it, while magnetic removal depends on whether the magnetic force can move the whole contaminated piece.<\/strong> A small steel fragment locked inside a heavy lump can be much harder to extract than the same loose fragment. Include representative embedded targets in the trial. If the magnet leaves them behind, arrange detection followed by stopping or rejection rather than testing only exposed loose steel.<\/p><\/details>\n<details><summary>Is a magnet enough if metal contamination is rare?<\/summary><p><strong>Frequency determines the cleaning or interruption workload; the metal type and damage risk determine the protection needed.<\/strong> Rare ferrous pieces may suit a manual-clean magnet when capture is adequate and safe cleaning is practical. Rare non-magnetic hazards still need an appropriate detector and removal action. Use recovered-object and incident records to make that distinction, rather than treating a low alarm count as proof that the line is protected.<\/p><\/details>\n<\/section>\n<\/article>\n<script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Can a conveyor metal detector replace a magnet for fine iron dust?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Do not make that replacement unless the detector can find the required fine-iron target in the real material. Very small magnetic particles may need a separator that brings them close to a strong field, such as a suitable grate, drum, or high-intensity arrangement. A large overhead magnet and a detector sized for damaging tramp objects address different conditions. Define the particle size and product-quality target before changing the equipment.\"}}, {\"@type\": \"Question\", \"name\": \"Why does the detector still alarm after an overband magnet?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"First identify what the detector is responding to: escaped iron, another metal, or an installation or material signal. Retain the recovered object and note the load depth and operating state. Escaped iron points back to capture distance, burial, or discharge performance. A non-magnetic object needs a detection-and-removal response. Events repeating at the belt splice or a nearby machine cycle call for a belt or installation investigation before changing sensitivity.\"}}, {\"@type\": \"Question\", \"name\": \"Can I keep a steel-cord belt or metal belt fasteners?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Possibly, but the detector must be selected and tested for that belt construction. Some systems accommodate steel cords or metal splices; others need different belt details. Where clip compensation reduces sensitivity during a splice passage, include the required target at that passage in the commissioning test. A split-frame design makes mechanical fitting easier; it does not by itself solve the belt\u2019s electrical or magnetic effect.\"}}, {\"@type\": \"Question\", \"name\": \"What if the metal is embedded inside a lump or plastic part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A suitable detector may identify it, while magnetic removal depends on whether the magnetic force can move the whole contaminated piece. A small steel fragment locked inside a heavy lump can be much harder to extract than the same loose fragment. Include representative embedded targets in the trial. If the magnet leaves them behind, arrange detection followed by stopping or rejection rather than testing only exposed loose steel.\"}}, {\"@type\": \"Question\", \"name\": \"Is a magnet enough if metal contamination is rare?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Frequency determines the cleaning or interruption workload; the metal type and damage risk determine the protection needed. Rare ferrous pieces may suit a manual-clean magnet when capture is adequate and safe cleaning is practical. Rare non-magnetic hazards still need an appropriate detector and removal action. Use recovered-object and incident records to make that distinction, rather than treating a low alarm count as proof that the line is protected.\"}}]}<\/script>\n","protected":false},"excerpt":{"rendered":"<p>Quick Summary A magnetic separator removes metal that responds strongly enough to its magnetic field. A conveyor metal detector finds a target and sends a signal for an alarm, stop, or reject action. Use a magnet for recurring iron removal, a detector with a working removal response for other metal hazards, and both when your [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":4213,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-5498","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/posts\/5498","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/comments?post=5498"}],"version-history":[{"count":2,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/posts\/5498\/revisions"}],"predecessor-version":[{"id":5596,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/posts\/5498\/revisions\/5596"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/media\/4213"}],"wp:attachment":[{"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/media?parent=5498"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/categories?post=5498"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/tags?post=5498"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}