{"id":5514,"date":"2026-11-02T17:36:17","date_gmt":"2026-11-02T09:36:17","guid":{"rendered":"https:\/\/www.corvelanmag.com\/?p=5514"},"modified":"2026-10-30T13:46:18","modified_gmt":"2026-10-30T05:46:18","slug":"electromagnetic-separator-cooling-methods","status":"publish","type":"post","link":"https:\/\/www.corvelanmag.com\/es\/electromagnetic-separator-cooling-methods\/","title":{"rendered":"Separadores refrigerados por aire, por aceite y mediante circulaci\u00f3n forzada de aceite"},"content":{"rendered":"\n<style>\n.corvelan-cooling{--cooling-accent:#475569;--cooling-dark:#1f2937;--cooling-soft:#f3f4f6;--cooling-border:#d1d5db;color:#1f2937;font-size:17px;line-height:1.75;overflow-wrap:break-word}\n.corvelan-cooling .cooling-section,.corvelan-cooling .cooling-intro,.corvelan-cooling .cooling-nav{box-sizing:border-box;margin:0 0 24px;padding:22px;border:1px solid var(--cooling-border);border-radius:16px;background:#fff}\n.corvelan-cooling .cooling-section{border-top:4px solid var(--cooling-accent);box-shadow:0 2px 8px rgba(15,23,42,.04)}\n.corvelan-cooling .cooling-intro,.corvelan-cooling .cooling-nav{background:var(--cooling-soft)}\n.corvelan-cooling h2{font-size:30px;line-height:1.3;margin:0 0 18px;color:var(--cooling-dark);scroll-margin-top:28px}\n.corvelan-cooling h3{font-size:24px;line-height:1.35;margin:28px 0 12px;color:var(--cooling-dark)}\n.corvelan-cooling p{margin:0 0 16px}.corvelan-cooling p:last-child{margin-bottom:0}\n.corvelan-cooling ul,.corvelan-cooling ol{padding-inline-start:24px;margin:12px 0 20px}.corvelan-cooling li{margin:0 0 10px}\n.corvelan-cooling a{color:#334155;text-decoration:underline;text-underline-offset:3px}.corvelan-cooling a:focus-visible,.corvelan-cooling summary:focus-visible,.corvelan-cooling .cooling-table:focus-visible{outline:3px solid #475569;outline-offset:4px}\n.corvelan-cooling .cooling-table{overflow-x:auto;margin:20px 0;border:1px solid var(--cooling-border);border-radius:8px}\n.corvelan-cooling table{border-collapse:collapse;min-width:640px;font-size:16px;line-height:1.65}.corvelan-cooling th,.corvelan-cooling td{padding:14px;vertical-align:top;text-align:left;border-bottom:1px solid var(--cooling-border)}\n.corvelan-cooling th{background:var(--cooling-soft);color:var(--cooling-dark)}.corvelan-cooling tbody tr:last-child td{border-bottom:0}\n.corvelan-cooling .cooling-media{display:block;float:none;clear:both;margin:24px 0}.corvelan-cooling .cooling-media img{display:block;float:none;max-width:100%;height:auto;margin-inline:auto}\n.corvelan-cooling .cooling-cta a{display:inline-block;padding:12px 20px;background:#334155;color:#fff;border-radius:7px;text-decoration:none;font-weight:700}\n.corvelan-cooling details{border-top:1px solid var(--cooling-border);padding:16px 0}.corvelan-cooling summary{cursor:pointer;font-weight:700;color:var(--cooling-dark)}.corvelan-cooling details p{margin:12px 0 0}\n@media(max-width:767px){.corvelan-cooling{font-size:16px}.corvelan-cooling .cooling-section,.corvelan-cooling .cooling-intro,.corvelan-cooling .cooling-nav{padding:18px;margin-bottom:18px;border-radius:12px}.corvelan-cooling .cooling-section{border-top-width:3px}.corvelan-cooling h2{font-size:24px}.corvelan-cooling h3{font-size:20px}.corvelan-cooling th,.corvelan-cooling td{padding:12px}.corvelan-cooling .cooling-cta a{display:block;text-align:center}}\n<\/style>\n<article class=\"corvelan-cooling\">\n<div class=\"cooling-intro\"><p><strong>Choose electromagnetic separator cooling methods by the heat the coil must release during your longest run and the conditions around the magnet.<\/strong> Air-cooled designs avoid cooling oil. Naturally oil-cooled designs move coil heat through oil to the housing or cooling surfaces. Forced-oil-cooled designs actively circulate oil through a heat exchanger. Choose the simplest arrangement that meets the required hot operating performance at your site.<\/p>\n<p>This comparison covers suspended conveyor electromagnets that remove unwanted iron and steel, often called tramp iron. Cooling keeps the energized coil within its design limits. The cleaning belt has a separate job: carrying captured metal away. A self-cleaning separator can use different cooling arrangements.<\/p><\/div>\n<nav class=\"cooling-nav\" aria-label=\"Article sections\"><p><strong>In this guide<\/strong><\/p><ol><li><a href=\"#differences\">What is the difference between the three cooling methods?<\/a><\/li><li><a href=\"#hot-performance\">Why does cooling affect hot operating performance?<\/a><\/li><li><a href=\"#site-selection\">Which cooling method fits your site?<\/a><\/li><li><a href=\"#maintenance\">What maintenance and protection does each method need?<\/a><\/li><li><a href=\"#hot-testing\">How should you compare separators after they warm up?<\/a><\/li><li><a href=\"#running-costs\">How should you compare running costs?<\/a><\/li><li><a href=\"#product-options\">Which Corvelan product should you compare?<\/a><\/li><li><a href=\"#cooling-faqs\">Cooling method FAQs<\/a><\/li><\/ol><\/nav>\n<section class=\"cooling-section\" aria-labelledby=\"differences\"><h2 id=\"differences\">What is the difference between the three cooling methods?<\/h2>\n<div class=\"cooling-media\"><img loading=\"lazy\" src=\"https:\/\/www.corvelanmag.com\/wp-content\/uploads\/2026\/09\/coverlan-oil-cooled-suspended-electromagnet-hero-20260922-a3f9c1.webp\" alt=\"Suspended separator housing with external tubes and a top-mounted tank\" width=\"1200\" height=\"900\" loading=\"lazy\" decoding=\"async\" style=\"display:block;max-width:100%;height:auto;object-fit:contain;\"><\/div>\n<p><strong>The main difference is how heat travels from the coil to the surroundings, and whether moving equipment is needed to carry it away.<\/strong> Forced-oil cooling is a type of oil cooling. In a three-way comparison, \u201coil-cooled\u201d usually means natural oil circulation, but the cooling drawing should settle the terminology.<\/p>\n<div class=\"cooling-table\" tabindex=\"0\" role=\"region\" aria-label=\"Scrollable comparison table\"><table><thead><tr><th scope=\"col\">What to compare<\/th><th scope=\"col\">Air-cooled<\/th><th scope=\"col\">Naturally oil-cooled<\/th><th scope=\"col\">Forced-oil-cooled<\/th><\/tr><\/thead><tbody><tr><td>Heat path<\/td><td>Coil heat passes through the designed solid structure and leaves to surrounding air<\/td><td>Insulating oil carries heat from the coil to the housing, fins or radiator<\/td><td>A pump circulates oil between the magnet and a heat exchanger<\/td><\/tr><tr><td>What drives cooling<\/td><td>Natural airflow, or a fan in designs that use forced air<\/td><td>Oil movement caused by temperature and density differences<\/td><td>Pumped oil flow; the exchanger then rejects heat to air or another cooling medium<\/td><\/tr><tr><td>Main attraction<\/td><td>No oil circuit to fill, leak or service<\/td><td>Oil transfers heat around the winding without a circulation pump in a natural-circulation design<\/td><td>More control over heat removal and possible use of a separate cooler<\/td><\/tr><tr><td>Main dependency<\/td><td>Clear heat-release surfaces and the required airflow<\/td><td>Correct oil level, oil condition and an unobstructed heat-release path<\/td><td>Oil flow, exchanger performance, auxiliary power and fault controls<\/td><\/tr><tr><td>Decision point<\/td><td>Can the offered dry design meet the continuous thermal and magnetic duty?<\/td><td>Can natural circulation release enough heat at the required ambient temperature?<\/td><td>Does active cooling solve a heat or space constraint worth the extra components?<\/td><\/tr><\/tbody><\/table><\/div>\n\n<h3>Air-cooled separators<\/h3>\n<p>Air-cooled does not mean air is blown directly over an exposed winding. Heat may pass through a sealed or encapsulated assembly before reaching the outside air. Some designs use natural cooling; others use fans. Ask which arrangement is offered, because a fan adds a service item and a failure condition.<\/p>\n<p><strong>Air cooling can suit heavy-duty separation.<\/strong> <a href=\"https:\/\/buntingmagnetics.com\/product\/magnetic-separation\/overband-magnets\" rel=\"nofollow noopener\" target=\"_blank\">Bunting<\/a> lists both air-cooled ACW and oil-cooled OCW overbands for heavy-duty work. The cooling label alone does not divide light-duty from heavy-duty magnets. Compare the offered design at the required working distance and operating temperature.<\/p>\n<h3>Naturally oil-cooled separators<\/h3>\n<p>The oil carries heat away from the coil as warmer oil rises and cooler oil returns. The housing or cooling sections then release that heat to the surroundings. The oil circuit remains separate from the conveyed material, so an oil-cooled conveyor magnet still handles a dry material stream.<\/p>\n<p>Eriez describes its <a href=\"https:\/\/www.eriez.com\/Products\/Magnetic-Separation\/Magnetic-Separation-for-Tramp-Metal\/Large-Magnetic-Separation\/Suspended-Electromagnets\" rel=\"nofollow noopener\" target=\"_blank\">Series 7000 suspended magnets<\/a> as oil-filled and convection-cooled. This is an example of continuous operation without an external cooling system. <strong>Oil-filled does not automatically mean pump-equipped.<\/strong><\/p>\n<h3>Forced-oil-cooled separators<\/h3>\n<p>A pump moves oil through a heat exchanger and back through the cooling circuit. An oil-to-air exchanger may also use fans. The arrangement may be integrated with the magnet or use a separate cooler, depending on the design.<\/p>\n<p>Active cooling can help when a specified magnetic duty creates more heat than a practical natural-cooling arrangement can release. It can also help meet a space constraint. Eriez offers compact force-cooled designs for this purpose. The pump, cooler, connecting lines and controls must all be included when comparing the complete installation.<\/p>\n<\/section>\n<section class=\"cooling-section\" aria-labelledby=\"hot-performance\"><h2 id=\"hot-performance\">Why does cooling affect hot operating performance?<\/h2>\n<p><strong>Cooling helps the coil sustain its designed excitation as it warms up. With a fixed DC voltage, rising winding resistance reduces current.<\/strong> Excitation is the electrical input used to create the magnetic field. Current produces that field, but the final pickup result also depends on the magnetic circuit, target iron, distance, material depth and belt speed.<\/p>\n<p>A copper or aluminum winding becomes more electrically resistant as it gets hotter. For a voltage-fed coil, the steady DC relationship is:<\/p>\n<p><strong>Current I = voltage V \u00f7 resistance R.<\/strong><\/p>\n<p>For example, suppose a coil receives a steady 120 V DC. Its measured resistance is 6 \u03a9 cold and 7.5 \u03a9 hot:<\/p>\n<ul><li>Cold current: 120 \u00f7 6 = <strong>20 A<\/strong>.<\/li><li>Hot current: 120 \u00f7 7.5 = <strong>16 A<\/strong>.<\/li><li>Current reduction: (20 \u2212 16) \u00f7 20 \u00d7 100 = <strong>20%<\/strong>.<\/li><\/ul>\n<p>That calculation explains why a cold-start current reading can differ from a hot reading. It does not turn into a 20% loss in pickup force or removal efficiency. Test the target iron under the actual hot operating condition.<\/p>\n<p>A current-regulated supply behaves differently. It raises voltage as resistance increases to maintain the selected current, within its output limits. At a constant 20 A, coil heating would rise from <strong>20\u00b2 \u00d7 6 = 2,400 W<\/strong> to <strong>20\u00b2 \u00d7 7.5 = 3,000 W<\/strong> in this example. That makes heat removal important even when current stays steady.<\/p>\n<p><a href=\"https:\/\/www.magnet-schultz.com\/en\/electromagnets\/\" rel=\"nofollow noopener\" target=\"_blank\">Magnet-Schultz<\/a> explains the temperature\u2013resistance relationship in its electromagnet guidance. The same basic electrical relationship applies here, while the separator\u2019s winding, magnetic circuit and supply determine its actual performance. <strong>A cold Gauss reading should therefore be paired with hot operating data when you compare separator offers.<\/strong><\/p>\n<\/section>\n<section class=\"cooling-section\" aria-labelledby=\"site-selection\"><h2 id=\"site-selection\">Which cooling method fits your site?<\/h2>\n<p><strong>Keep an air-cooled or naturally oil-cooled design when it meets the required hot performance in your actual environment. Compare forced-oil cooling when heat rejection or available space prevents those simpler arrangements from meeting the duty.<\/strong> A 24-hour schedule alone does not select the cooling method.<\/p>\n<p>First establish the longest time the coil stays energized, the hottest air around the magnet, and the required iron-removal task. Conveyor idle time is not a cooling break if the magnet stays powered.<\/p>\n<div class=\"cooling-table\" tabindex=\"0\" role=\"region\" aria-label=\"Scrollable comparison table\"><table><thead><tr><th scope=\"col\">Your condition<\/th><th scope=\"col\">Where to start<\/th><th scope=\"col\">What changes the choice<\/th><\/tr><\/thead><tbody><tr><td>Oil-free construction is important<\/td><td>A suitably rated air-cooled design<\/td><td>Required magnetic reach or the available cooling space exceeds what the offered dry design can deliver<\/td><\/tr><tr><td>Continuous duty with room for natural heat release<\/td><td>Compare rated air-cooled and naturally oil-cooled designs<\/td><td>Hot running data shows a thermal limit, inadequate hot excitation or insufficient capture<\/td><\/tr><tr><td>High local ambient temperature and restricted magnet size<\/td><td>Compare a forced-oil arrangement with a cooler in a suitable location<\/td><td>The cooler would still draw hot, recirculated air, or maintenance access is poor<\/td><\/tr><tr><td>Heavy dust covers fins or blocks air passages<\/td><td>Solve access and cleaning first, then compare complete cooling arrangements<\/td><td>A separate cooler can be placed in cleaner air and serviced reliably<\/td><\/tr><tr><td>Remote site with limited maintenance support<\/td><td>Favor the rated arrangement with fewer auxiliary failure points<\/td><td>Meeting the required thermal duty needs active cooling and the site can support its spares and controls<\/td><\/tr><tr><td>High altitude or radiant heat from nearby equipment<\/td><td>Obtain a site-specific thermal review<\/td><td>The offered rating was established at different altitude, airflow or surrounding temperatures<\/td><\/tr><\/tbody><\/table><\/div>\n<p>Measure air temperature near the magnet\u2019s cooling surfaces or the cooler inlet, clear of direct sun or hot-surface contact. Record the hottest part of the operating day. A regional weather average can miss a hot conveyor enclosure, nearby furnace or recirculating cooler discharge.<\/p>\n<p><a href=\"https:\/\/www.ife-bulk.com\/en\/machines\/electromagnetic-overband-separator\" rel=\"nofollow noopener\" target=\"_blank\">IFE<\/a> states that external oil cooling supports its equipment in ambient temperatures above 40\u00b0C. That is a useful example of why local ambient conditions matter. <strong>Use the offered model\u2019s temperature rating; 40\u00b0C is not a universal switch point between air, oil and forced oil.<\/strong><\/p>\n<p>Consider three situations. A continuously running conveyor with an oil-free requirement should first compare a rated air-cooled design. A plant whose existing natural oil-cooled magnet already passes hot capture tests has no thermal reason to add a pump. A cramped installation that cannot release enough heat naturally should compare a designed active-cooling package, including where the rejected heat will go.<\/p>\n<\/section>\n<section class=\"cooling-section\" aria-labelledby=\"maintenance\"><h2 id=\"maintenance\">What maintenance and protection does each method need?<\/h2>\n<p><strong>Maintain the full heat path, then define what the conveyor must do if cooling or magnet excitation fails.<\/strong> Keeping the cleaning belt moving does not preserve iron removal when the electromagnetic field is lost.<\/p>\n<p>For an air-cooled unit, keep the heat-release surfaces clear. Where fans are fitted, inspect the air path, fan condition and any filters. A hot-air pocket or dust blanket can reduce heat release even when the fan motor runs.<\/p>\n<p>For natural oil cooling, inspect for leaks and maintain the specified oil level and fluid condition. Oil level can depend on the approved suspension angle and expansion arrangement. Use the specified oil rather than mixing convenient substitutes. <a href=\"https:\/\/www.eriez.com\/Documents\/Literature\/IOMs\/Magnetic-Separation\/SM-323-Eriez-Suspend-Electromagnet-IOM.pdf\" rel=\"nofollow noopener\" target=\"_blank\">Eriez\u2019s SM323 manual<\/a> specifically calls for cold oil-level checks and compatible replacement oil. Its service intervals belong to those models; use the schedule supplied for the selected separator.<\/p>\n<p><strong>Isolate electrical and mechanical energy, allow the unit to cool, and use the prescribed pressure-release procedure before opening oil service points.<\/strong> Captured iron, the cleaning belt and hot fluid create separate hazards. Live electrical measurements belong to qualified personnel using suitable instruments and procedures.<\/p>\n<p>For forced oil cooling, add the pump, exchanger, connecting lines and any cooling fans to the inspection scope. Define these functions in the technical order:<\/p>\n<ul><li>How the system confirms adequate cooling before allowing the coil to energize.<\/li><li>Which temperature is sensed: winding, oil or another defined point.<\/li><li>How low flow, pump failure, fan failure where relevant, and excessive temperature are detected.<\/li><li>Which faults raise an alarm, inhibit startup or shut down excitation.<\/li><li>What happens to incoming material when magnetic protection is unavailable.<\/li><\/ul>\n<p>For crusher protection, agree the stop or diversion sequence with the conveyor controls. Include material already travelling between the separator and crusher. A delayed conveyor stop can leave unprotected feed moving downstream after the field has disappeared. During commissioning, test the agreed fault response through approved control tests; do not deliberately run a hot coil without required cooling.<\/p>\n<\/section>\n<section class=\"cooling-section\" aria-labelledby=\"hot-testing\"><h2 id=\"hot-testing\">How should you compare separators after they warm up?<\/h2>\n<p><strong>Compare hot capture performance at the same target position, material depth and belt speed, while recording the electrical and cooling conditions.<\/strong> A cooler housing or a stronger cold surface reading alone does not settle the choice.<\/p>\n<ol><li><strong>Define the separation task.<\/strong> Record the material, maximum depth of the material layer (burden depth), belt speed, mounting geometry and target iron\u2019s material, size, shape and mass. Use the same magnet-face-to-target distance for each comparison. Include the difficult buried position that matters to your process.<\/li><li><strong>Define the thermal condition.<\/strong> Agree ambient temperature, operating schedule, coil supply mode and how thermal stabilization\u2014a temperature trend that has settled under steady conditions\u2014will be identified. Run until the agreed stabilization criterion is met, rather than stopping after an arbitrary short demonstration. Include the cooler location and airflow condition.<\/li><li><strong>Record the hot electrical state.<\/strong> Qualified personnel record DC voltage and current at the specified measurement points, along with temperatures and cooling status. Identify whether the nameplate current is a cold or hot value before treating a current change as a fault.<\/li><li><strong>Repeat the agreed pickup task while hot.<\/strong> Use safely controlled target pieces, fixed positions and an agreed number of passes. Record each attempt, including full capture and discharge, a miss, or a piece lifted and dropped back. Plan recovery of all test pieces so they cannot enter downstream equipment.<\/li><li><strong>Compare against the agreed acceptance values.<\/strong> Review capture results alongside temperature, excitation and auxiliary operation. Prove the specified control responses through approved commissioning tests. Record the final settings and the tested operating condition.<\/li><\/ol>\n<div class=\"cooling-table\" tabindex=\"0\" role=\"region\" aria-label=\"Scrollable comparison table\"><table><thead><tr><th scope=\"col\">Raw record<\/th><th scope=\"col\">Why it matters<\/th><\/tr><\/thead><tbody><tr><td>Timestamp, local air temperature and energized elapsed time<\/td><td>Shows when the hot result was taken<\/td><\/tr><tr><td>Coil DC voltage, current and supply-control mode<\/td><td>Separates a supply issue from the expected hot electrical behavior<\/td><\/tr><tr><td>Temperature value, sensor type and exact location<\/td><td>Keeps winding, oil and surface readings from being mixed<\/td><\/tr><tr><td>Pump\/flow indication, fan state and cooler condition where fitted<\/td><td>Shows whether the cooling package was operating as intended<\/td><\/tr><tr><td>Target ID, position, material depth, belt speed and result for every pass<\/td><td>Makes the capture comparison repeatable<\/td><\/tr><tr><td>Alarm or interlock tested and observed response<\/td><td>Records what the line did when protection was unavailable<\/td><\/tr><\/tbody><\/table><\/div>\n<p>An infrared camera can help locate hot surfaces or blocked heat-release areas. It does not directly measure the hottest point inside the winding. <a href=\"https:\/\/www.magnet-schultz.com\/fileadmin\/Daten\/Vertrieb\/PR1\/TechnErl\/GXX_e.pdf\" rel=\"nofollow noopener\" target=\"_blank\">Magnet-Schultz\u2019s technical guidance<\/a> explains this internal temperature difference. Where winding temperature must be established, use the agreed sensor or a manufacturer-approved electrical measurement method.<\/p>\n<p><strong>If hot capture fails and current is below the specified hot value, investigate the supply and thermal behavior together.<\/strong> If excitation and temperature meet their limits but buried iron is still missed, revisit working distance, feed depth, belt speed and magnetic sizing. A larger cooling package will not correct the wrong separation geometry.<\/p>\n<\/section>\n<section class=\"cooling-section\" aria-labelledby=\"running-costs\"><h2 id=\"running-costs\">How should you compare running costs?<\/h2>\n<p><strong>Compare total electrical input and service needs for the same successful hot separation task.<\/strong> A lower coil-power figure can be misleading if one offer excludes its rectifier losses, pump, fans or cleaning-belt drive.<\/p>\n<p>Use measured AC input at a clearly defined system boundary where possible. If separate inputs are recorded, add only the loads inside that boundary. Avoid counting the coil again when its rectifier\u2019s measured input already includes it.<\/p>\n<p>For example, suppose the measured rectifier input is 8 kW, the cooling auxiliaries draw 0.6 kW, and the cleaning-belt drive draws 0.4 kW. With all three loads running for 20 hours:<\/p>\n<p><strong>Total input = 8 + 0.6 + 0.4 = 9 kW.<\/strong><\/p>\n<p><strong>Energy per day = 9 \u00d7 20 = 180 kWh.<\/strong><\/p>\n<p>Multiply 180 kWh by your electricity price for that day\u2019s energy cost. If fans or pumps cycle, use their actual running time or a logged energy reading. This example establishes the calculation; the offered equipment\u2019s data supplies your inputs.<\/p>\n<p>Also compare oil sampling or replacement requirements, exchanger cleaning, fan and pump spares, access labor, and the cost of a cooling fault stopping production. A natural-cooling option that meets the duty may avoid auxiliary service work. A designed forced-oil package can still be the better choice when it meets a heat or space requirement the alternatives cannot meet.<\/p>\n<\/section>\n<section class=\"cooling-section\" aria-labelledby=\"product-options\"><h2 id=\"product-options\">Which Corvelan product should you compare?<\/h2>\n<p><strong>Choose the cleaning arrangement and magnetic duty first, then compare the cooling construction available for that product.<\/strong> Our product names identify useful starting options; the project specification should identify the actual cooling circuit and electrical package.<\/p>\n<ul><li>For intermittent iron loading and planned manual cleaning, start with our <a href=\"https:\/\/www.corvelanmag.com\/products\/suspended-electromagnetic-separator\/\">RCDB suspended electromagnetic separator<\/a>. Specify the required cooling arrangement rather than assuming it from the RCDB designation.<\/li><li>For automatic side discharge with an oil-cooled electromagnet, compare our <a href=\"https:\/\/www.corvelanmag.com\/products\/oil-cooled-self-cleaning-cross-belt-electromagnetic-separator\/\">RCDF oil-cooled self-cleaning cross-belt electromagnetic separator<\/a>.<\/li><li>For a suspended oil-cooled option where planned cleaning is acceptable, review our <a href=\"https:\/\/www.corvelanmag.com\/products\/oil-cooled-suspended-electromagnet\/\">RCDE oil-cooled suspended electromagnet<\/a>. Ask how oil circulates in the offered configuration.<\/li><li>When the comparison calls for active oil circulation, review our <a href=\"https:\/\/www.corvelanmag.com\/products\/rcdfq-forced-oil-cooled-electromagnetic-separator\/\">RCDFQ forced oil-cooled electromagnetic separator<\/a>. Include the cooler, pump, connecting services and controls in the requested scope so the complete package can be compared.<\/li><\/ul>\n<p>The practical choice among electromagnetic separator cooling methods is the simplest complete arrangement that maintains the required hot excitation and iron removal. Keep a suitable air-cooled or naturally oil-cooled design. Move to forced oil cooling when the defined heat or space requirement justifies active circulation and the site can maintain it.<\/p>\n<p>Send us your material, target iron, belt width and speed, maximum material depth, installation drawing, local ambient range and daily energized hours. Add oil-use restrictions and available service space. These details let us compare suitable product arrangements and identify what the technical quotation needs to define.<\/p>\n<p class=\"cooling-cta\"><a href=\"https:\/\/www.corvelanmag.com\/contact-us\/\">Discuss Your Separator Cooling Requirements<\/a><\/p>\n<\/section>\n<section class=\"cooling-section faq\" aria-labelledby=\"cooling-faqs\"><h2 id=\"cooling-faqs\">Cooling method FAQs<\/h2>\n<details open><summary>Does 24\/7 operation require forced oil cooling?<\/summary><p><strong>No. Continuous operation requires a separator rated for continuous energized duty at your site conditions.<\/strong> Air-cooled and naturally oil-cooled designs can meet that task when correctly sized. Compare forced oil cooling when the required heat removal or installation space exceeds the offered simpler design\u2019s capability.<\/p><\/details>\n<details open><summary>Does oil cooling solve a dusty-site cooling problem?<\/summary><p><strong>Only if the complete heat-release arrangement remains effective in that dust.<\/strong> Oil carries heat away from the winding, but the heat still has to leave the housing or exchanger. If dust blankets those surfaces, provide cleaning access or place a suitable separate cooler in a cleaner location.<\/p><\/details>\n<details open><summary>Can an existing oil-cooled magnet be upgraded by adding a pump?<\/summary><p><strong>Treat this as an engineered modification to the full cooling circuit.<\/strong> The housing connections, oil passages, allowable pressure, fluid, expansion provision, exchanger and controls must suit pumped operation. First establish why the current unit runs hot: oil loss, blocked heat-release surfaces, changed duty or incorrect supply may need correction before a redesign.<\/p><\/details>\n<details open><summary>Can Class F insulation be used to set the oil-temperature alarm?<\/summary><p><strong>No. An insulation thermal class describes winding insulation, while an oil-temperature sensor measures a different point.<\/strong> Use the selected design\u2019s sensor location, allowable temperatures and alarm\/trip settings. Setting an oil alarm directly from an insulation-class temperature can leave the winding insufficiently protected.<\/p><\/details>\n<details open><summary>What should happen if the oil pump stops while the conveyor is running?<\/summary><p><strong>Use the agreed fault response to protect the coil and prevent unprotected feed from reaching downstream equipment.<\/strong> Depending on the designed controls, this can involve an alarm, loss of excitation permission, controlled feed stoppage or diversion. The sequence must account for material already on the belt. Restore the cooling fault and required permissives before restarting the protected process.<\/p><\/details>\n<\/section>\n<\/article>\n<script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does 24\/7 operation require forced oil cooling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Continuous operation requires a separator rated for continuous energized duty at your site conditions. Air-cooled and naturally oil-cooled designs can meet that task when correctly sized. Compare forced oil cooling when the required heat removal or installation space exceeds the offered simpler design\u2019s capability.\"}}, {\"@type\": \"Question\", \"name\": \"Does oil cooling solve a dusty-site cooling problem?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Only if the complete heat-release arrangement remains effective in that dust. Oil carries heat away from the winding, but the heat still has to leave the housing or exchanger. If dust blankets those surfaces, provide cleaning access or place a suitable separate cooler in a cleaner location.\"}}, {\"@type\": \"Question\", \"name\": \"Can an existing oil-cooled magnet be upgraded by adding a pump?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Treat this as an engineered modification to the full cooling circuit. The housing connections, oil passages, allowable pressure, fluid, expansion provision, exchanger and controls must suit pumped operation. First establish why the current unit runs hot: oil loss, blocked heat-release surfaces, changed duty or incorrect supply may need correction before a redesign.\"}}, {\"@type\": \"Question\", \"name\": \"Can Class F insulation be used to set the oil-temperature alarm?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. An insulation thermal class describes winding insulation, while an oil-temperature sensor measures a different point. Use the selected design\u2019s sensor location, allowable temperatures and alarm\/trip settings. Setting an oil alarm directly from an insulation-class temperature can leave the winding insufficiently protected.\"}}, {\"@type\": \"Question\", \"name\": \"What should happen if the oil pump stops while the conveyor is running?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use the agreed fault response to protect the coil and prevent unprotected feed from reaching downstream equipment. Depending on the designed controls, this can involve an alarm, loss of excitation permission, controlled feed stoppage or diversion. The sequence must account for material already on the belt. Restore the cooling fault and required permissives before restarting the protected process.\"}}]}<\/script>\n","protected":false},"excerpt":{"rendered":"<p>Choose electromagnetic separator cooling methods by the heat the coil must release during your longest run and the conditions around the magnet. Air-cooled designs avoid cooling oil. Naturally oil-cooled designs move coil heat through oil to the housing or cooling surfaces. Forced-oil-cooled designs actively circulate oil through a heat exchanger. Choose the simplest arrangement that [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":4399,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-5514","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/posts\/5514","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/comments?post=5514"}],"version-history":[{"count":1,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/posts\/5514\/revisions"}],"predecessor-version":[{"id":5625,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/posts\/5514\/revisions\/5625"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/media\/4399"}],"wp:attachment":[{"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/media?parent=5514"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/categories?post=5514"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/tags?post=5514"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}