{"id":5552,"date":"2026-11-13T17:12:23","date_gmt":"2026-11-13T09:12:23","guid":{"rendered":"https:\/\/www.corvelanmag.com\/?p=5552"},"modified":"2026-10-30T13:47:42","modified_gmt":"2026-10-30T05:47:42","slug":"tramp-metal-detection-target-crusher-protection","status":"publish","type":"post","link":"https:\/\/www.corvelanmag.com\/es\/tramp-metal-detection-target-crusher-protection\/","title":{"rendered":"C\u00f3mo definir el objeto met\u00e1lico da\u00f1ino de menor tama\u00f1o para proteger la trituradora"},"content":{"rendered":"\n<style>\n.cv-target-article{--cv-accent:#475569;--cv-text:#1f2937;--cv-soft:#f6f7f8;--cv-border:#d8dee5;color:var(--cv-text);font-family:inherit;line-height:1.7;overflow-wrap:anywhere}\n.cv-target-article .article-lead,.cv-target-article .article-toc,.cv-target-article .article-section{padding:22px;margin:0 0 24px;border:1px solid var(--cv-border);border-radius:10px;background:#fff}\n.cv-target-article .article-lead,.cv-target-article .article-toc{background:var(--cv-soft)}\n.cv-target-article .article-section{border-top:3px solid var(--cv-accent);box-shadow:0 2px 7px #00000006}\n.cv-target-article h2{font-size:1.5em;line-height:1.35;margin:0 0 18px;scroll-margin-top:100px}\n.cv-target-article h3{font-size:1.15em;line-height:1.4;margin:26px 0 12px}\n.cv-target-article p{margin:0 0 16px}\n.cv-target-article p:last-child{margin-bottom:0}\n.cv-target-article a{color:#334155;text-decoration:underline;text-underline-offset:3px}\n.cv-target-article a:focus-visible,.cv-target-article .table-scroll:focus-visible{outline:3px solid #475569;outline-offset:4px}\n.cv-target-article li{margin:0 0 9px}\n.cv-target-article ul,.cv-target-article ol{padding-left:24px;margin:0 0 18px}\n.cv-target-article .table-scroll{overflow-x:auto;margin:20px 0;overscroll-behavior-x:contain}\n.cv-target-article table{width:100%;min-width:590px;border-collapse:collapse;font-size:inherit}\n.cv-target-article th,.cv-target-article td{border:1px solid var(--cv-border);padding:12px;text-align:left;vertical-align:top}\n.cv-target-article th{background:var(--cv-soft);font-weight:700}\n.cv-target-article blockquote{border-left:3px solid var(--cv-accent);background:var(--cv-soft);padding:16px 18px;margin:20px 0}\n.cv-target-article .article-media{display:block;float:none;clear:both;margin:20px 0}\n.cv-target-article .article-media img{display:block;float:none;max-width:100%;height:auto;margin-inline:auto}\n.cv-target-article .article-faq h3{padding-top:20px;border-top:1px solid var(--cv-border)}\n@media(max-width:767px){.cv-target-article .article-lead,.cv-target-article .article-toc,.cv-target-article .article-section{padding:18px}.cv-target-article h2{font-size:1.35em}.cv-target-article th,.cv-target-article td{padding:10px}}\n<\/style>\n<div class=\"cv-target-article\"><div class=\"article-lead\"><p><strong>Quick Summary<\/strong><\/p><p><strong>Define the smallest harmful metal for crusher protection from the machine\u2019s damage risks and the actual metal pieces that can enter its feed. Then prove that the detector finds those pieces in the hardest required operating conditions, and that the line stops or removes them in time.<\/strong> There is no single metal diameter that protects every crusher.<\/p>\n<p>A useful tramp metal detection target for crusher protection describes more than size. It identifies the metal, shape, dimensions, position in the load, and required response. A steel ball can be a repeatable test piece, but a bolt, thin wear fragment, and long rod create different jobs.<\/p>\n<p>The practical result should be a short target list and a test record that your crusher team, detector supplier, and controls team can all use.<\/p>\n<\/div><nav aria-label=\"In this guide\" class=\"article-toc\"><p><strong>In this guide<\/strong><\/p><ul><li><a href=\"#harmful-metal\">What makes a metal object harmful to your crusher?<\/a><\/li><li><a href=\"#target-samples\">How do you build a useful metal target set?<\/a><\/li><li><a href=\"#detection-requirement\">How do you turn the target set into a detection requirement?<\/a><\/li><li><a href=\"#loaded-testing\">How should you test the target under working conditions?<\/a><\/li><li><a href=\"#stopping-distance\">Will the metal stop before it reaches the crusher?<\/a><\/li><li><a href=\"#magnets-and-detectors\">Where do magnets fit in the protection plan?<\/a><\/li><li><a href=\"#define-your-target\">Define the target before choosing the detector<\/a><\/li><li><a href=\"#crusher-protection-faq\">Frequently asked questions<\/a><\/li><\/ul><\/nav><section class=\"article-section\"><h2 id=\"harmful-metal\">What makes a metal object harmful to your crusher?<\/h2>\n<p><strong>A metal object is harmful when its material, shape, and size can damage the crushing chamber, jam the machine, or harm another part of the feed system under your operating conditions.<\/strong> Start with the machine and the possible failure, then choose the test object.<\/p>\n<p>Read the crusher model, chamber configuration, operating setting, and any tramp-material restrictions in its technical documents. Match these with repair reports and recovered objects. A report of a broken liner, a jam, or a torn feed belt is more useful when the offending piece was retained and measured.<\/p>\n<div aria-label=\"Metal shapes and risks\" class=\"table-scroll\" role=\"region\" tabindex=\"0\"><table>\n<thead>\n<tr>\n<th scope=\"col\">Object in the feed<\/th>\n<th scope=\"col\">Risk to investigate<\/th>\n<th scope=\"col\">What to record<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Compact bolt, nut, tooth, or solid fragment<\/td>\n<td>Trapping, high load, or impact on vulnerable parts<\/td>\n<td>Full dimensions, material or part number, and the damaged location<\/td>\n<\/tr>\n<tr>\n<td>Long rod, rebar, or wire bundle<\/td>\n<td>Bridging a transfer, spearing a belt, or entering the chamber in an unfavorable direction<\/td>\n<td>Diameter or thickness, total length, bends, and likely travel direction<\/td>\n<\/tr>\n<tr>\n<td>Thin plate or broken wear part<\/td>\n<td>An awkward shape entering the chamber; a detection response unlike the reference ball<\/td>\n<td>Length, width, thickness, alloy, and representative orientations<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<p>These are investigation prompts. They do not classify every piece in a row as equally dangerous.<\/p>\n<p><strong>Do not turn the crusher\u2019s closed-side setting into a universal allowable metal size.<\/strong> Closed-side setting, often called CSS, describes the crushing gap at its closest operating position. A gap alone does not describe how a long, hard, or irregular object will behave. Use the OEM\u2019s guidance for the actual machine and compare it with the pieces found at your site.<\/p>\n<p>Automatic tramp relief also has a separate job from detection. For example, the <a href=\"https:\/\/www.terex.com\/finlay\/en\/products\/cone-crushers\/c-1545-stone-crusher\" rel=\"nofollow noopener\" target=\"_blank\">Finlay C-1545 product description<\/a> lists hydraulic tramp relief alongside feed-belt metal detection, auto-stop, and a purge system. The presence of relief does not establish an acceptable feed-metal size for your crusher.<\/p>\n<\/section><section class=\"article-section\"><h2 id=\"target-samples\">How do you build a useful metal target set?<\/h2>\n<div class=\"article-media\"><img loading=\"lazy\" src=\"https:\/\/www.corvelanmag.com\/wp-content\/uploads\/2026\/10\/corvelan-conveyor-metal-target-reference-20261030-v1.webp\" alt=\"Metal objects on an empty conveyor belt beneath a detector frame\" width=\"1200\" height=\"900\" loading=\"lazy\" decoding=\"async\" style=\"display:block;max-width:100%;height:auto;object-fit:contain;\"><\/div>\n<p><strong>Build a small set of representative harmful objects, with a separate sample for each important metal and shape.<\/strong> The most dangerous object and the hardest object to detect may be different pieces, so keep both when they represent real feed risks.<\/p>\n<h3>Start with recovered parts and original records<\/h3>\n<p>Collect metal retained after alarms, magnet catches, maintenance, and previous incidents. Keep the incident date and feed source with each object. Include the relevant crusher repair photos, supplier part drawings, and wear-part specifications. A photo without a scale or a note saying \u201csmall steel\u201d is not enough to recreate the test.<\/p>\n<p>For each selected piece:<\/p>\n<ol>\n<li>Assign a permanent sample ID and photograph it beside a scale.<\/li>\n<li>Measure length, width, and thickness with suitable measuring tools. For a rod, record diameter and length. For a bolt, include the head dimensions and overall length.<\/li>\n<li>Record the alloy or original part number where available. Keep unknown material marked as unknown; do not rename every wear fragment \u201cmild steel.\u201d<\/li>\n<li>Weigh the piece if this helps identify it or assess magnetic removal. Mass supplements the shape record; it does not replace it.<\/li>\n<li>Write why it belongs in the target set: an OEM restriction, a documented incident, or a suspected hazard still being reviewed.<\/li>\n<\/ol>\n<p>Keep different failure types separate. A compact fragment chosen for chamber protection does not replace a long rod chosen because it can damage the conveyor before reaching the chamber.<\/p>\n<h3>If you have no damage history or minimum size from the OEM<\/h3>\n<p><strong>Use a provisional target set based on credible contamination sources, and keep the damage limit open until it has a sound basis.<\/strong> Look at loader teeth, screen parts, fasteners, wear liners, tools, and upstream maintenance work that could introduce metal. Use actual spare parts or representative fragments to describe the risk.<\/p>\n<p>Send the crusher OEM the model, chamber, setting, metal details, and proposed targets. Ask which objects must be excluded and whether a smaller representative piece is needed. Meanwhile, a detector supplier can assess the proposed samples against the conveyor conditions. This separates a machine-risk decision from a detection-capability decision.<\/p>\n<p>Do not feed metal into a crusher to discover the damage limit. <a href=\"https:\/\/www.metso.com\/globalassets\/parts-pages\/mx-wear-safety\/mx_pg_mantle_removal_disposal_and_installation_safety_rev2_en.pdf\" rel=\"nofollow noopener\" target=\"_blank\">Metso\u2019s crushing-plant safety guidance<\/a> describes hazards from ejected metal and from removing trapped material. Establish the target from records and technical review; test detection with controlled recovery before the crusher.<\/p>\n<p>A useful precedent appears in the <a href=\"https:\/\/www.eriez.com\/Documents\/Literature\/IOMs\/Metal-Detection\/MM-1235-Analog-Eriez-Model-1235-Metal-Detector-IOM.pdf\" rel=\"nofollow noopener\" target=\"_blank\">Eriez Model 1235 calibration instructions<\/a>. Its sample table distinguishes the smallest damaging non-magnetic piece from the largest non-damaging sample, and uses separate magnetic samples around the magnet\u2019s removal capability. This is a model-specific procedure, but it shows why one generic test cube cannot describe every protection task. Only use a \u201charmless\u201d sample when that classification has an actual basis.<\/p>\n<\/section><section class=\"article-section\"><h2 id=\"detection-requirement\">How do you turn the target set into a detection requirement?<\/h2>\n<p><strong>Specify the actual sample and the operating conditions in which it must be found.<\/strong> \u201cDetect 10 mm metal\u201d leaves the metal type, shape, load position, and line response undefined.<\/p>\n<p>The <a href=\"https:\/\/www.thermofisher.com\/order\/catalog\/product\/ORETRONICIV4A\/faqs\" rel=\"nofollow noopener\" target=\"_blank\">Thermo Scientific Oretronic IV FAQ<\/a> identifies material, burden depth, belt width, belt speed, and coil gap as variables affecting detectable tramp size. Put these inputs beside your sample record so two suppliers are quoting the same job.<\/p>\n<div aria-label=\"Detection requirement inputs\" class=\"table-scroll\" role=\"region\" tabindex=\"0\"><table>\n<thead>\n<tr>\n<th scope=\"col\">Requirement<\/th>\n<th scope=\"col\">How to obtain it<\/th>\n<th scope=\"col\">Why it changes the test<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Metal and geometry<\/td>\n<td>Sample, part drawing, alloy record, and measured dimensions<\/td>\n<td>A mild-steel ball does not represent every alloy or shape<\/td>\n<\/tr>\n<tr>\n<td>Load depth and position<\/td>\n<td>Measure the normal and deepest permitted material layer across the belt<\/td>\n<td>The target must be found throughout the required loaded area<\/td>\n<\/tr>\n<tr>\n<td>Conveyor and opening<\/td>\n<td>Belt specification, trough profile, belt width, and detector layout<\/td>\n<td>Steel cords, clips, clearance, and coil arrangement affect suitability<\/td>\n<\/tr>\n<tr>\n<td>Speed and material<\/td>\n<td>Operating records for the intended speed range, feed types, and moisture conditions<\/td>\n<td>A clean, empty-belt demonstration leaves out the material background<\/td>\n<\/tr>\n<tr>\n<td>Required action<\/td>\n<td>Controls drawing and agreed stop, diversion, or recovery method<\/td>\n<td>An alarm must lead to a response before the target reaches the hazard<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<p>For elongated pieces, include lengthwise, crosswise, and upright orientations where physically possible. The <a href=\"https:\/\/www.eriez.com\/Documents\/Literature\/IOMs\/Metal-Detection\/MMDG-1230-Digital-Eriez-Model-1230-Metal-Detector-IOM.pdf\" rel=\"nofollow noopener\" target=\"_blank\">Eriez Model 1230 manual<\/a> directs testing in three orientations and setting up for the weak response. Use the least favorable credible orientation of your actual target, rather than assuming the longest-looking piece gives the strongest signal.<\/p>\n<p><strong>Do not convert a bolt, plate, or rod into an \u201cequivalent ball diameter\u201d by volume alone.<\/strong> The conversion would preserve volume, but it would not establish the same detector response. Keep a standard reference sample for repeat checks and the representative harmful pieces for application testing.<\/p>\n<p>For example, suppose a site review has selected a steel fragment measuring 30 \u00d7 15 \u00d7 5 mm. A draft requirement could read:<\/p>\n<blockquote>\n<p>Sample T1: the retained steel fragment, 30 \u00d7 15 \u00d7 5 mm, with its material record and photograph. Detect it in every agreed position across the loaded belt, including the weakest credible orientation. Test with a 1,000 mm fabric belt, up to 250 mm material depth, and belt speeds from 1.5 to 2.0 m\/s. Record each pass and prove the stop-and-recover action before the crusher feed point.<\/p>\n<\/blockquote>\n<p>Those dimensions and conditions are example inputs. In a real specification, the sample ID ties the words to a physical object. Add separate entries for a relevant wear alloy, non-ferrous part, or long rod instead of treating T1 as evidence for all metals.<\/p>\n<\/section><section class=\"article-section\"><h2 id=\"loaded-testing\">How should you test the target under working conditions?<\/h2>\n<p><strong>Test every required sample through the agreed inspection area, at the required load and speed conditions, then verify the full line response.<\/strong> A successful pass close to the sensor on an empty belt leaves the loaded application untested.<\/p>\n<p>Before moving any test piece, arrange a controlled test with the people responsible for the conveyor, crusher, detector, and controls. <strong>The test arrangement must prevent samples from entering the crusher even if detection or stopping fails.<\/strong> Use an approved test or recovery arrangement with a clear exclusion area. Do not rely on the unproven detector to keep a test safe, and do not reach onto a moving belt to retrieve a sample. Isolate the equipment before access for placement or recovery where required by the plant procedure.<\/p>\n<ol>\n<li><strong>Establish the background.<\/strong> Run the empty belt and then the normal material without an added target. Note whether alarms follow a splice, a machine cycle, vibration, or a change in feed. Record the settings used.<\/li>\n<li><strong>Map the required area.<\/strong> Use controlled sample placement at the left, center, and right of the material stream. Include positions near the belt, within the load, and near the top wherever the target could travel. Keep the carrier or fixture consistent and account for it in the background check.<\/li>\n<li><strong>Include the difficult conditions.<\/strong> Use the deepest permitted load and the relevant feed types and speeds. A target at the top of a deep load is particularly important for an underbelt arrangement because it is farther from the sensor. Do not assume that this is the weakest position for every detector design; map the actual arrangement.<\/li>\n<li><strong>Compare the credible orientations.<\/strong> Rotate elongated targets through the agreed directions. Keep their position and load condition fixed while comparing the response, then repeat the weak combinations.<\/li>\n<li><strong>Record each pass and action.<\/strong> Note sample ID, location, orientation, load depth, speed, detector setting, alarm, output, and final stop or removal. Agree the repeat count and acceptance rule before starting. Retain individual misses rather than hiding them in an average.<\/li>\n<\/ol>\n<p>If splice compensation is used, add the target at the relevant splice passage to the agreed test. A setup that ignores the belt joint must still meet the required protection at that point.<\/p>\n<p>Include representative running time without added targets to assess unwanted trips. Record duration, feed conditions, belt revolutions, and every event investigated. Agree the allowable interruption burden with the plant; an unexplained alarm is not automatically a false alarm.<\/p>\n<div aria-label=\"Test results and next actions\" class=\"table-scroll\" role=\"region\" tabindex=\"0\"><table>\n<thead>\n<tr>\n<th scope=\"col\">Observed result<\/th>\n<th scope=\"col\">Next action<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Target passes on an empty belt but is missed in deep material<\/td>\n<td>Reproduce the failing position. Review load depth, sensor gap, feed distribution, and detector suitability; change the affected condition and repeat the test<\/td>\n<\/tr>\n<tr>\n<td>One orientation or one material is missed<\/td>\n<td>Keep that sample and condition as an open requirement. Test the revised setup against the same failure before accepting it<\/td>\n<\/tr>\n<tr>\n<td>Detection is repeatable, but metal travels too far afterward<\/td>\n<td>Correct the stop, diversion, location, or recovery arrangement; more sensitivity does not fix late stopping<\/td>\n<\/tr>\n<tr>\n<td>Required targets and final actions pass, with acceptable background behavior<\/td>\n<td>Keep the tested settings and operating range as the baseline; retain the samples for future checks<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<p>A series of successful passes documents performance in those conditions. It does not establish a guaranteed detection probability for every future feed condition. Record the number of trials and the actual results so later checks can reproduce the work.<\/p>\n<\/section><section class=\"article-section\"><h2 id=\"stopping-distance\">Will the metal stop before it reaches the crusher?<\/h2>\n<p><strong>Only if the complete response leaves the target at a safe, recoverable position before it reaches an irreversible transfer or the crusher feed.<\/strong> Check this separately from whether the detector alarms.<\/p>\n<p>Measure the usable travel distance from the agreed sensing reference to the last point where the piece can still be stopped and recovered. This may be the conveyor discharge, rather than the crusher inlet. Once material has left the belt, stopping the belt may not stop its movement through a chute.<\/p>\n<p>For a single belt carrying the target without slip, a useful distance check is:<\/p>\n<p><strong>Required distance = belt travel before the stop command + measured belt travel from the stop command to rest + an agreed allowance.<\/strong><\/p>\n<p>If speed is constant before the command, the first term is belt speed \u00d7 total response delay. Measure that delay from the target passing the sensing reference to the drive receiving the stop command. It includes detector and control delays. Measure the second term under the relevant loaded conditions, including any drive delay after the command. Do not count the same delay in both terms.<\/p>\n<p>Suppose the following inputs have been agreed for an example layout:<\/p>\n<ul>\n<li>Belt speed: 2.0 m\/s.<\/li>\n<li>Response delay before the drive stop command: 0.20 s.<\/li>\n<li>Measured belt travel from that command to rest: 3.0 m.<\/li>\n<li>Additional allowance chosen for this example: 0.8 m.<\/li>\n<\/ul>\n<p>The distance check gives <strong>2.0 \u00d7 0.20 + 3.0 + 0.8 = 4.2 m<\/strong>. If only 3.8 m is usable, that layout is short by 0.4 m against the example requirement. Move detection upstream, reduce stopping travel through a suitable engineered change, or provide a proven diversion arrangement. Do not accept the layout merely because the alarm was fast.<\/p>\n<p>The allowance needs a site-specific basis. Rolling metal, material sliding on an incline, variable stopping behavior, and downstream feed continuing to run can change the result. Where these apply, verify the target\u2019s actual final position in the controlled trial and include the associated equipment response. A belt-distance calculation alone does not describe those extra movements.<\/p>\n<\/section><section class=\"article-section\"><h2 id=\"magnets-and-detectors\">Where do magnets fit in the protection plan?<\/h2>\n<p><strong>Use a magnet to remove suitable ferrous pieces, and use detection with an effective line response for the harmful targets that remain.<\/strong> Keep the target list the same when checking both stages, but record removal and detection as separate results.<\/p>\n<p>An <a href=\"https:\/\/www.corvelanmag.com\/products\/overband-magnetic-separator\/\">overband magnetic separator<\/a> can remove recurring magnetic iron from the feed. Its ability to lift a piece depends on the working distance, burial, and whether the object is free to move. A small steel fragment trapped inside a heavy lump presents a different removal task from the same fragment lying loose.<\/p>\n<p>A wear part with little magnetic attraction, a non-ferrous object, or a piece the magnet cannot lift still needs an appropriate response. Do not identify an alloy or approve a detector from a hand-magnet check alone. Retain the actual sample and its part information for the detection trial.<\/p>\n<p>For routine iron removal followed by a check for remaining hazards, a practical arrangement is magnet first, detector afterward, with both acting before the protected machine. If the existing magnet removes routine iron well, retain it and address the remaining detection gap. Leave the detector suitable clearance from the magnet and nearby moving metal, using the selected equipment\u2019s installation requirements.<\/p>\n<p>Our <a href=\"https:\/\/www.corvelanmag.com\/product-category\/conveyor-metal-detector\/\">conveyor metal detector range<\/a> includes different fitting arrangements. Compare them against the target samples, belt construction, load depth, and required line action. Frame fit alone does not establish that a detector will find the agreed target throughout the load.<\/p>\n<\/section><section class=\"article-section\"><h2 id=\"define-your-target\">Define the target before choosing the detector<\/h2>\n<p><strong>A useful tramp metal detection target for crusher protection is a documented harmful object, tested in its difficult credible positions and operating conditions, with a proven stop or removal response.<\/strong> Define a target family when different metals or shapes matter. Keep the machine-risk decision separate from the detector\u2019s demonstrated capability.<\/p>\n<p>Save the samples, target list, settings, loaded test results, and final stopping positions together. That record gives you a practical baseline when feed, conveyor conditions, or crusher settings change.<\/p>\n<p>To discuss a Corvelan arrangement, send us the crusher model, target dimensions and metal details, belt width and construction, maximum load depth, belt speed, and available stopping distance. Use our <a href=\"https:\/\/www.corvelanmag.com\/contact-us\/\">contact form for a conveyor protection review<\/a>. Include the key details in the message; send sample photos or drawings to <a href=\"mailto:sales@corvelanmag.com\">sales@corvelanmag.com<\/a>.<\/p>\n<\/section><section class=\"article-section article-faq\"><h2 id=\"crusher-protection-faq\">Frequently asked questions<\/h2>\n<h3>One conveyor feeds two crushers. Can we use one minimum target size?<\/h3>\n<p><strong>Use a combined target set covering the harmful objects for both machines, unless the feed paths have separate, verified protection.<\/strong> The smaller compact target may govern one test, while a different alloy or long object governs another. Record which crusher each target protects and test any routing arrangement that changes where the material goes.<\/p>\n<h3>Our steel ball passes every time, but a wear fragment is missed. What should we change first?<\/h3>\n<p><strong>First repeat the test with the retained fragment and compare its orientation, load position, and material with the ball.<\/strong> If the ball still passes at the fragment\u2019s failing location, the two samples are not interchangeable for that setup. Keep the real fragment as a requirement and test the revised detector setting or arrangement against it. Do not raise the harmful-size limit to match the successful ball test.<\/p>\n<h3>A smaller metal piece passed through without damage. Can we label that size harmless?<\/h3>\n<p><strong>One uneventful passage is not enough to classify a size or shape as harmless.<\/strong> The piece may have entered in a favorable direction or avoided a vulnerable part. Keep its dimensions and circumstances in the incident record, then compare it with the OEM\u2019s restrictions and the relevant damage mechanism. Do not repeat the passage as a crusher trial.<\/p>\n<h3>Can we suppress metal belt-clip alarms and still claim full target coverage?<\/h3>\n<p><strong>Only after proving the required target is detected during the compensated splice passage as well as away from it.<\/strong> First establish whether the setting changes detection during that interval. If a harmful target is missed, the requirement remains open: revise the compensation, belt-joint arrangement, or detector solution and repeat the affected test. Stable running without clip alarms alone is not acceptance.<\/p>\n<h3>Do we need new tests after changing the crusher setting or feed source?<\/h3>\n<p><strong>Revisit the affected targets and tests when the change alters the damage risk or detection conditions.<\/strong> A different crusher setting calls for a new machine-risk review. A new feed source may introduce another wear alloy, shape, moisture condition, or material background. Retain the unchanged test results, add the new samples or conditions, and repeat the affected protection response. Use a full new baseline when the changes affect the whole application.<\/p><\/section><\/div>\n<script type=\"application\/ld+json\">\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"One conveyor feeds two crushers. Can we use one minimum target size?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Use a combined target set covering the harmful objects for both machines, unless the feed paths have separate, verified protection. The smaller compact target may govern one test, while a different alloy or long object governs another. Record which crusher each target protects and test any routing arrangement that changes where the material goes.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Our steel ball passes every time, but a wear fragment is missed. What should we change first?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"First repeat the test with the retained fragment and compare its orientation, load position, and material with the ball. If the ball still passes at the fragment\u2019s failing location, the two samples are not interchangeable for that setup. Keep the real fragment as a requirement and test the revised detector setting or arrangement against it. Do not raise the harmful-size limit to match the successful ball test.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"A smaller metal piece passed through without damage. Can we label that size harmless?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"One uneventful passage is not enough to classify a size or shape as harmless. The piece may have entered in a favorable direction or avoided a vulnerable part. Keep its dimensions and circumstances in the incident record, then compare it with the OEM\u2019s restrictions and the relevant damage mechanism. Do not repeat the passage as a crusher trial.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can we suppress metal belt-clip alarms and still claim full target coverage?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Only after proving the required target is detected during the compensated splice passage as well as away from it. First establish whether the setting changes detection during that interval. If a harmful target is missed, the requirement remains open: revise the compensation, belt-joint arrangement, or detector solution and repeat the affected test. Stable running without clip alarms alone is not acceptance.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Do we need new tests after changing the crusher setting or feed source?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Revisit the affected targets and tests when the change alters the damage risk or detection conditions. A different crusher setting calls for a new machine-risk review. A new feed source may introduce another wear alloy, shape, moisture condition, or material background. Retain the unchanged test results, add the new samples or conditions, and repeat the affected protection response. Use a full new baseline when the changes affect the whole application.\"\n      }\n    }\n  ]\n}\n<\/script>\n","protected":false},"excerpt":{"rendered":"<p>Quick Summary Define the smallest harmful metal for crusher protection from the machine\u2019s damage risks and the actual metal pieces that can enter its feed. Then prove that the detector finds those pieces in the hardest required operating conditions, and that the line stops or removes them in time. There is no single metal diameter [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":5624,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-5552","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/posts\/5552","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/comments?post=5552"}],"version-history":[{"count":1,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/posts\/5552\/revisions"}],"predecessor-version":[{"id":5633,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/posts\/5552\/revisions\/5633"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/media\/5624"}],"wp:attachment":[{"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/media?parent=5552"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/categories?post=5552"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.corvelanmag.com\/es\/wp-json\/wp\/v2\/tags?post=5552"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}