{"id":5532,"date":"2026-11-08T17:48:02","date_gmt":"2026-11-08T09:48:02","guid":{"rendered":"https:\/\/www.corvelanmag.com\/?p=5532"},"modified":"2026-10-30T13:02:51","modified_gmt":"2026-10-30T05:02:51","slug":"magnetic-separator-power-consumption","status":"publish","type":"post","link":"https:\/\/www.corvelanmag.com\/fr\/magnetic-separator-power-consumption\/","title":{"rendered":"Consommation \u00e9lectrique d\u2019un s\u00e9parateur magn\u00e9tique : aimant, entra\u00eenement et refroidissement"},"content":{"rendered":"\n<style>\n.cv-power {--cv-accent:#334155;--cv-text:#1f2937;--cv-soft:#f4f6f8;--cv-border:#d8dee6;color:var(--cv-text);font:inherit;font-size:17px;line-height:1.75;overflow-wrap:anywhere;}\n.cv-power .cv-intro,.cv-power .cv-section,.cv-power .cv-closing,.cv-power .cv-nav {display:block;float:none;clear:both;box-sizing:border-box;margin:0 0 24px;padding:22px;border:1px solid var(--cv-border);border-radius:16px;background:#fff;}\n.cv-power .cv-section {border-top:4px solid var(--cv-accent);box-shadow:0 2px 8px rgb(15 23 42 \/ 4%);scroll-margin-top:100px;}\n.cv-power .cv-intro,.cv-power .cv-nav {background:var(--cv-soft);}\n.cv-power h2 {font-size:30px;line-height:1.3;color:var(--cv-accent);margin:0 0 18px;}\n.cv-power h3 {font-size:24px;line-height:1.3;color:var(--cv-accent);margin:28px 0 14px;}\n.cv-power p {margin:0 0 16px;}\n.cv-power p:last-child {margin-bottom:0;}\n.cv-power ul,.cv-power ol {margin:0 0 18px;padding-left:24px;}\n.cv-power li {margin-bottom:10px;}\n.cv-power a {color:#334155;text-decoration:underline;text-underline-offset:3px;}\n.cv-power a:focus-visible,.cv-power summary:focus-visible,.cv-power .cv-table:focus-visible {outline:3px solid #334155;outline-offset:4px;}\n.cv-power .cv-table {display:block;overflow-x:auto;margin:20px 0;}\n.cv-power table {border-collapse:collapse;width:100%;min-width:620px;font:inherit;}\n.cv-power th,.cv-power td {padding:12px 14px;text-align:left;vertical-align:top;border:1px solid var(--cv-border);}\n.cv-power th {background:var(--cv-soft);color:var(--cv-text);font-weight:700;}\n.cv-power .cv-media {display:block;float:none;clear:both;margin:20px 0;}\n.cv-power .cv-media img {display:block;float:none;max-width:100%;height:auto;margin-inline:auto;}\n.cv-power .cv-formula {padding:14px 16px;border-left:3px solid var(--cv-accent);background:var(--cv-soft);}\n.cv-power .cv-cta {margin-top:24px;padding-top:22px;border-top:1px solid var(--cv-border);}\n.cv-power .cv-button {display:inline-block;padding:11px 18px;border-radius:8px;background:var(--cv-accent);color:#fff;text-decoration:none;font-weight:700;}\n.cv-power .cv-faq-item + .cv-faq-item {border-top:1px solid var(--cv-border);margin-top:22px;padding-top:1px;}\n.cv-power .cv-nav summary {cursor:pointer;font-weight:700;}\n.cv-power .cv-nav summary::after {content:' +';}\n.cv-power .cv-nav details[open] summary::after {content:' \u2212';}\n.cv-power .cv-nav ul {margin-top:14px;margin-bottom:0;}\n@media (max-width:768px) {\n .cv-power {font-size:16px;}\n .cv-power .cv-intro,.cv-power .cv-section,.cv-power .cv-closing,.cv-power .cv-nav {padding:18px;border-radius:12px;margin-bottom:18px;}\n .cv-power .cv-section {border-top-width:3px;}\n .cv-power h2 {font-size:24px;}\n .cv-power h3 {font-size:20px;}\n .cv-power th,.cv-power td {padding:10px 12px;}\n}\n<\/style>\n<div class=\"cv-power\">\n<div class=\"cv-intro\"><p><strong>Magnetic separator power consumption is the electricity used by the complete operating package: magnetic excitation, drives, cooling and controls.<\/strong> Permanent magnets need no electricity to maintain their field, but a rotating drum or self-cleaning belt still needs a drive. An electromagnet also needs power while its coil is energized.<\/p>\n<p>For a useful estimate, separate the loads, use their actual electrical input and multiply each by its own operating hours. Then compare the energy against the tonnes processed and the required separation result. A single catalogue kW figure rarely gives you all three.<\/p>\n<\/div>\n<nav class=\"cv-nav\" aria-label=\"Article contents\"><details open><summary>On this page<\/summary><ul><li><a href=\"#power-components\">Which parts of a magnetic separator use electricity?<\/a><\/li><li><a href=\"#magnet-cooling\">How do excitation and cooling affect power consumption?<\/a><\/li><li><a href=\"#energy-cost\">How do you calculate daily kWh and electricity cost?<\/a><\/li><li><a href=\"#per-tonne\">How do you compare energy use per tonne fairly?<\/a><\/li><li><a href=\"#measurement\">How should you measure actual separator consumption?<\/a><\/li><li><a href=\"#reduce-power\">What should you change first to reduce electricity use?<\/a><\/li><li><a href=\"#faq\">Frequently asked questions about separator electricity use<\/a><\/li><\/ul><\/details><\/nav>\n<section class=\"cv-section\" id=\"power-components\"><h2>Which parts of a magnetic separator use electricity?<\/h2>\n<div class=\"cv-media\"><img loading=\"lazy\" src=\"https:\/\/www.corvelanmag.com\/wp-content\/uploads\/2026\/09\/coverlan-rcydc-cross-belt-drive-pulley-view.webp\" alt=\"Self-cleaning separator with an endless belt, end rollers and motor drive\" width=\"800\" height=\"600\" loading=\"lazy\" decoding=\"async\" style=\"display:block;max-width:100%;height:auto;object-fit:contain;\"><\/div>\n<p><strong>Count the magnetic source, moving parts and supporting equipment separately.<\/strong> A drive turns the drum or cleaning belt; excitation energizes an electromagnetic coil; fans and pumps remove heat where the design uses them. Controls and power-conversion losses also enter the electricity bill.<\/p>\n<div aria-label=\"Scrollable comparison table\" class=\"cv-table\" role=\"region\" tabindex=\"0\"><table><thead><tr><th scope=\"col\">Configuration<\/th><th scope=\"col\">Magnetic excitation<\/th><th scope=\"col\">Other loads to include<\/th><\/tr><\/thead><tbody>\n<tr><td>Stationary, manually cleaned permanent magnet<\/td><td>None<\/td><td>Any powered lifting or cleaning arrangement; the surrounding conveyor remains a separate load<\/td><\/tr>\n<tr><td>Permanent magnetic drum<\/td><td>None<\/td><td>Drum drive, controls and any dedicated feeder<\/td><\/tr>\n<tr><td>Self-cleaning permanent overband<\/td><td>None<\/td><td>Cleaning-belt drive and controls<\/td><\/tr>\n<tr><td>Manually cleaned suspended electromagnet<\/td><td>Coil and its power supply<\/td><td>Cooling auxiliaries where fitted, controls and any powered handling<\/td><\/tr>\n<tr><td>Self-cleaning electromagnet<\/td><td>Coil and its power supply<\/td><td>Cleaning-belt drive, cooling auxiliaries and controls<\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p>Put dedicated feeders, slurry pumps, reject conveyors and dust extraction on a second list. Include them when comparing a complete separation stage. Keep them separate when comparing separator packages alone. Otherwise, one offer may appear more economical simply because it leaves more equipment outside its quoted scope.<\/p>\n<h3>Does a permanent magnetic separator use no power?<\/h3>\n<p><strong>The permanent magnetic element uses no excitation power; the machine can still consume electricity through its drive and auxiliaries.<\/strong> In a permanent drum, the magnetic assembly can remain stationary while the outer shell rotates to carry and release material. That rotation requires mechanical power.<\/p>\n<p>The <a href=\"https:\/\/www.eriez.com\/Documents\/Literature\/IOMs\/Magnetic-Separation\/SM-340-Eriez-Permanent-Magnetic-Dry-Drum-Separator-IOM1.pdf\" rel=\"nofollow noopener\" target=\"_blank\">Eriez permanent dry-drum manual<\/a> distinguishes the unpowered magnetic element from the motor and drive. Use the same distinction when reviewing our <a href=\"https:\/\/www.corvelanmag.com\/products\/dry-drum-magnetic-separator\/\">dry drum magnetic separators<\/a>: identify the magnetic source, then list the drive and feeding scope.<\/p>\n<p>For a <a href=\"https:\/\/www.corvelanmag.com\/products\/overband-magnetic-separator\/\">permanent overband magnetic separator<\/a>, the field does not need an energized coil. The cleaning belt still needs energy to carry captured iron out of the magnetic area.<\/p>\n<h3>Is motor nameplate power the electrical input?<\/h3>\n<p><strong>A motor&#8217;s rated kW usually describes its mechanical shaft output at rated load, rather than its electrical input during your shift.<\/strong> Read the motor plate alongside the drive data and operating load. An electrical input measured upstream of a variable-frequency drive also includes that drive&#8217;s losses.<\/p>\n<p>Suppose a 7.5 kW motor delivers 60% of its rated shaft output, and its efficiency at that load is 90%. Shaft output is 7.5 \u00d7 0.60 = 4.5 kW. Electrical input at the motor is <strong>4.5 \u00f7 0.90 = 5.0 kW<\/strong>. Add drive-conversion losses only if they are outside that measurement or estimate.<\/p>\n<p>Use measured input for an operating machine. For a budget estimate, obtain the expected shaft load and the efficiency at that load. Rated efficiency alone does not establish part-load consumption, and an unloaded motor still draws power to cover its losses.<\/p>\n<\/section>\n<section class=\"cv-section\" id=\"magnet-cooling\"><h2>How do excitation and cooling affect power consumption?<\/h2>\n<p><strong>An electromagnet consumes power to energize its coil, while powered cooling adds a separate load.<\/strong> The rectifier converts the incoming AC supply to the DC needed by the coil. Its losses belong in the AC input you buy from the utility.<\/p>\n<p>A <a href=\"https:\/\/www.corvelanmag.com\/products\/suspended-electromagnetic-separator\/\">suspended electromagnetic separator<\/a> can therefore consume electricity even when it has no cleaning-belt motor. Manual cleaning removes the belt-drive requirement, not the excitation requirement.<\/p>\n<h3>Why can cold and hot readings differ?<\/h3>\n<p><strong>As a copper or aluminum coil warms, its resistance rises; the power trend then depends on how the supply controls voltage and current.<\/strong> For a settled DC operating condition, coil power in watts is P = V \u00d7 I. It can also be written as I\u00b2R or V\u00b2\/R, where R is coil resistance in ohms.<\/p>\n<ul><li><strong>Fixed voltage:<\/strong> rising resistance reduces current and coil power. The lower current also changes the magnetic operating condition.<\/li><li><strong>Fixed current:<\/strong> the supply must raise voltage as resistance increases, so coil power rises while it maintains that current within its operating limits.<\/li><\/ul>\n<p>Record DC voltage, DC current, temperature and the control mode together. Compare the same warm operating state when checking two readings. A drop in current alone does not establish an energy improvement.<\/p>\n<p>These relationships follow from the power equations in <a href=\"https:\/\/openstax.org\/books\/university-physics-volume-2\/pages\/9-5-electrical-energy-and-power\" rel=\"nofollow noopener\" target=\"_blank\">OpenStax&#8217;s electrical power chapter<\/a> and its explanation of <a href=\"https:\/\/openstax.org\/books\/university-physics-volume-2\/pages\/9-3-resistivity-and-resistance\" rel=\"nofollow noopener\" target=\"_blank\">resistance and temperature<\/a>. For a supply with substantial ripple, use an instrument suited to measuring that waveform instead of treating two display averages as a complete power measurement.<\/p>\n<h3>Does forced oil cooling always use more electricity?<\/h3>\n<p><strong>The cooling label alone does not tell you the total electrical input.<\/strong> Forced circulation can add pump and fan loads, but the coil, its operating point and the heat-removal arrangement also differ between machines. Compare complete packages that meet the same separation task.<\/p>\n<div aria-label=\"Scrollable comparison table\" class=\"cv-table\" role=\"region\" tabindex=\"0\"><table><thead><tr><th scope=\"col\">Cooling arrangement<\/th><th scope=\"col\">How heat leaves<\/th><th scope=\"col\">What to count<\/th><\/tr><\/thead><tbody>\n<tr><td>Air cooling<\/td><td>Heat passes to surrounding air, naturally or with forced airflow<\/td><td>Any fitted fans and their actual running hours<\/td><\/tr>\n<tr><td>Oil cooling with natural circulation<\/td><td>Oil carries heat within the designed enclosure and heat-release surfaces<\/td><td>Any electrical auxiliaries actually fitted; oil filling alone does not establish a pump load<\/td><\/tr>\n<tr><td>Forced oil circulation<\/td><td>A powered circulation system moves oil through a heat-removal circuit<\/td><td>Circulation pump, any fans, controls and their operating schedules<\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p>For our <a href=\"https:\/\/www.corvelanmag.com\/products\/rcdfq-forced-oil-cooled-electromagnetic-separator\/\">RCDFQ forced oil-cooled electromagnetic separator<\/a>, review the selected configuration&#8217;s excitation and auxiliary loads together. A fan-power entry is only one part of the load list; the project electrical documents should identify what the complete cooling package includes.<\/p>\n<p><strong>Heat rejection in kW is not an extra electrical load to add to coil input.<\/strong> It describes heat that the cooling system must remove. Count the electricity used by the cooling equipment itself. Adding the coil&#8217;s heat a second time would double-count the same energy.<\/p>\n<\/section>\n<section class=\"cv-section\" id=\"energy-cost\"><h2>How do you calculate daily kWh and electricity cost?<\/h2>\n<p><strong>Multiply each component&#8217;s average electrical input in kW by its own operating hours, then add the resulting kWh.<\/strong> When a component changes load, split it into operating states or use a meter&#8217;s accumulated energy reading.<\/p>\n<p class=\"cv-formula\">Daily energy, kWh = \u03a3 (average input kW \u00d7 hours at that input)<br\/>Annual energy, kWh = daily energy \u00d7 operating days<br\/>Energy cost = energy, kWh \u00d7 electricity rate per kWh<\/p>\n<p>Power in <strong>kW<\/strong> is the rate of electricity use. Energy in <strong>kWh<\/strong> is the quantity used over time. A 10 kW load held for 16 hours uses 160 kWh. A 10 kW rating by itself does not specify daily consumption.<\/p>\n<h3>What does a complete daily calculation look like?<\/h3>\n<p><strong>Use a separate row for every load that is outside the others&#8217; measurement boundaries.<\/strong> Suppose a proposed self-cleaning electromagnet has a 9.5 kW DC coil load and a rectifier efficiency of 95% at that operating point. Its rectifier AC input is 9.5 \u00f7 0.95 = 10.0 kW. Assume the remaining inputs and daily schedules below.<\/p>\n<div aria-label=\"Scrollable comparison table\" class=\"cv-table\" role=\"region\" tabindex=\"0\"><table><thead><tr><th scope=\"col\">Separate load<\/th><th scope=\"col\">Average electrical input<\/th><th scope=\"col\">Hours\/day<\/th><th scope=\"col\">Energy\/day<\/th><\/tr><\/thead><tbody>\n<tr><td>Rectifier and coil together<\/td><td>10.0 kW<\/td><td>16<\/td><td>160.0 kWh<\/td><\/tr>\n<tr><td>Cleaning-belt drive<\/td><td>1.2 kW<\/td><td>16<\/td><td>19.2 kWh<\/td><\/tr>\n<tr><td>Cooling fan<\/td><td>0.6 kW<\/td><td>12<\/td><td>7.2 kWh<\/td><\/tr>\n<tr><td>Oil circulation pump<\/td><td>0.3 kW<\/td><td>16<\/td><td>4.8 kWh<\/td><\/tr>\n<tr><td>Separate controls<\/td><td>0.1 kW<\/td><td>24<\/td><td>2.4 kWh<\/td><\/tr>\n<tr><td><strong>Total<\/strong><\/td><td>12.2 kW if all loads run at these inputs together<\/td><td>Different schedules<\/td><td><strong>193.6 kWh<\/strong><\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p>At 300 such operating days per year, energy is <strong>193.6 \u00d7 300 = 58,080 kWh<\/strong>. With an assumed flat energy price of US$0.12\/kWh, the energy charge is <strong>US$6,969.60 per year<\/strong>.<\/p>\n<p>The 95% efficiency and every load and schedule in this example are calculation inputs. For your machine, take them from the selected equipment documents, a measured operating record or a clearly stated estimate. If the rectifier cabinet&#8217;s AC meter already includes its controls or cooling fan, remove those separate rows. If you measure the complete separator package at one incoming supply, use that total directly.<\/p>\n<h3>How do different schedules and tariffs change the result?<\/h3>\n<p><strong>Use the actual hours and tariff for each period, including any powered standby or cooling after production stops.<\/strong> Do not multiply every component by the conveyor&#8217;s hours unless their schedules really match. Add nonproduction days separately if controls, heaters or other loads remain powered then.<\/p>\n<p>For time-of-use pricing, calculate each tariff period&#8217;s kWh and cost separately, then add the costs. Demand charges, power-factor charges, fixed charges and taxes belong on separate lines when the tariff applies them. A monthly demand charge depends on the billing rule and coincident plant demand; it is not simply another price to multiply by annual kWh.<\/p>\n<p>Keep cable, protective-device and generator sizing separate from this energy budget. Those tasks need maximum load, starting behavior and electrical-system details, rather than annual average consumption alone.<\/p>\n<\/section>\n<section class=\"cv-section\" id=\"per-tonne\"><h2>How do you compare energy use per tonne fairly?<\/h2>\n<p><strong>Divide the energy used by the tonnes processed over the same period, and compare machines that meet the same separation result.<\/strong> Lower running kW does not necessarily mean lower energy per tonne.<\/p>\n<p class=\"cv-formula\">Specific energy, kWh\/t = energy used during the test, kWh \u00f7 tonnes processed during the test<\/p>\n<p>For steady operation, the same relationship can be written as input kW \u00f7 throughput t\/h. Suppose two technically suitable setups process the same feed and meet the same capture and product-quality requirements:<\/p>\n<div aria-label=\"Scrollable comparison table\" class=\"cv-table\" role=\"region\" tabindex=\"0\"><table><thead><tr><th scope=\"col\">Assumed setup<\/th><th scope=\"col\">Package input<\/th><th scope=\"col\">Throughput<\/th><th scope=\"col\">Specific energy<\/th><th scope=\"col\">Energy for 10,000 t<\/th><\/tr><\/thead><tbody>\n<tr><td>A<\/td><td>10 kW<\/td><td>50 t\/h<\/td><td>0.20 kWh\/t<\/td><td>2,000 kWh<\/td><\/tr>\n<tr><td>B<\/td><td>6 kW<\/td><td>20 t\/h<\/td><td>0.30 kWh\/t<\/td><td>3,000 kWh<\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p><strong>Setup A uses less electricity for this same 10,000-tonne task, even though it draws more power while running.<\/strong> It needs 200 hours, while B needs 500. Choose A on this energy comparison if both also fit the required schedule and installation. Add unequal idle energy and supporting-equipment energy before using the result for the whole line.<\/p>\n<p>Keep the material, particle-size range, moisture, magnetic target, feed depth, working distance and acceptance method comparable. For ore recovery, include recovery and concentrate quality. For tramp-iron protection, use the agreed target pieces, conveyor speed and credible buried positions. A setting that saves electricity but lets damaging iron through has failed the task.<\/p>\n<p>On a wet line, state whether the denominator is dry solids, wet feed or total slurry. More dilution can increase pump duty without increasing dry-solids output. For a dry line with changing moisture, use a consistent mass basis as well.<\/p>\n<p>The <a href=\"https:\/\/www1.eere.energy.gov\/manufacturing\/eguide\/iso_step_2_7.html\" rel=\"nofollow noopener\" target=\"_blank\">U.S. Department of Energy&#8217;s energy-performance guidance<\/a> describes energy intensity as energy divided by output and calls for matching measurement periods. If kWh\/t rises, first separate longer idle running, lower throughput and a true increase in operating power. Those lead to different corrective actions.<\/p>\n<\/section>\n<section class=\"cv-section\" id=\"measurement\"><h2>How should you measure actual separator consumption?<\/h2>\n<p><strong>Meter the agreed equipment boundary, log representative operating states and match the energy record to production.<\/strong> A brief clamp-current reading cannot tell you annual electricity use or separate all the causes of a change.<\/p>\n<ol>\n<li><strong>Draw the supply boundary.<\/strong> Use the electrical diagram and load list to identify the rectifier, drive, fans, pumps and controls. Mark any separately supplied equipment. One incoming meter covers only the loads actually downstream of it.<\/li>\n<li><strong>Record the machine identity and settings.<\/strong> Keep the motor plate, rectifier ratings, cooling arrangement, speed settings and excitation control mode with the record. Distinguish connected ratings from measured operating inputs.<\/li>\n<li><strong>Log a representative cycle.<\/strong> Include startup, warming, normal loaded production, no-feed intervals and cooling after shutdown where these occur. Record cumulative kWh and time, rather than selecting only the lowest steady reading.<\/li>\n<li><strong>Pair electricity with the process.<\/strong> Record tonnes, particle size, moisture, feed depth, conveyor or drum speed, ambient conditions and the separation result over that same interval.<\/li>\n<li><strong>Explain differences with branch readings.<\/strong> If total energy is higher than expected, compare excitation, drive and cooling branches. Add all supplies once and compare their combined energy with the package total over a matching period.<\/li>\n<\/ol>\n<p>For a fairly balanced three-phase load under suitable waveform conditions, a useful power relationship is <strong>P(kW) \u2248 \u221a3 \u00d7 line-to-line V \u00d7 line A \u00d7 power factor \u00f7 1,000<\/strong>. Use the actual power factor, rather than assuming a fixed value. The <a href=\"https:\/\/www.energy.gov\/sites\/default\/files\/2014\/04\/f15\/10097517.pdf\" rel=\"nofollow noopener\" target=\"_blank\">DOE motor-load fact sheet<\/a> explains input-power measurement and the difference between electrical input and shaft output.<\/p>\n<p>With rectifiers, variable-frequency drives, unbalance or distorted waveforms, use a power analyzer suited to the supply and waveform to read real watts and kWh. A true-RMS current reading alone is still not real power. <a href=\"https:\/\/www.fluke.com\/en-us\/learn\/blog\/power-quality\/troubleshooting-power-harmonics\" rel=\"nofollow noopener\" target=\"_blank\">Fluke&#8217;s harmonics guidance<\/a> explains why electronic loads require suitable measurement methods.<\/p>\n<p>Have qualified electrical personnel make connections with appropriately rated instruments under the site&#8217;s electrical safety procedures. Use existing metering where available. For mechanical inspection or clearing, isolate the relevant electrical and stored mechanical energy; a permanent magnet&#8217;s field remains present after electrical isolation.<\/p>\n<p>If the branch totals and incoming meter do not agree, resolve the measurement first. Look for different logging periods, omitted supplies, meter scaling, phase-channel connections or a load counted twice. Once the energy records agree, repeat the separation check under the recorded feed conditions before accepting an energy change.<\/p>\n<\/section>\n<section class=\"cv-section\" id=\"reduce-power\"><h2>What should you change first to reduce electricity use?<\/h2>\n<p><strong>First identify whether the extra energy comes from more running hours, higher operating power or less useful output.<\/strong> Restore normal mechanical and cooling conditions before changing the magnetic duty. Any lower-power setting must still remove or recover the required material.<\/p>\n<div aria-label=\"Scrollable comparison table\" class=\"cv-table\" role=\"region\" tabindex=\"0\"><table><thead><tr><th scope=\"col\">What the record shows<\/th><th scope=\"col\">What to investigate first<\/th><th scope=\"col\">Action and follow-up<\/th><\/tr><\/thead><tbody>\n<tr><td>Daily kWh rises, but operating kW stays similar<\/td><td>Longer excitation, cleaning, standby or cooling hours<\/td><td>Compare control-state logs with production stops. Correct unnecessary running through the approved operating sequence, then compare a complete cycle.<\/td><\/tr>\n<tr><td>Drum or belt-drive input rises even without feed<\/td><td>Mechanical drag, buildup, belt tracking, tension, bearings or transmission condition<\/td><td>Isolate for inspection, remove the identified resistance and restore the specified setup. Repeat the no-feed reading at the same speed, followed by a loaded test.<\/td><\/tr>\n<tr><td>Cooling energy rises in hot or dusty periods<\/td><td>Longer fan or pump operation, restricted heat-transfer surfaces, changed ambient temperature or higher coil duty<\/td><td>Compare temperature and cooling-state logs. Restore the designed heat-removal path and repeat the warm operating test; retain thermal protection.<\/td><\/tr>\n<tr><td>Excitation input changes after warming or a control adjustment<\/td><td>DC voltage, current, temperature and whether the supply regulates voltage or current<\/td><td>Compare equivalent warm states. Correct a confirmed supply or control problem before changing the separation setting.<\/td><\/tr>\n<tr><td>kWh\/t rises while package kW is unchanged<\/td><td>Lower throughput, interrupted feed or longer idle time<\/td><td>Restore stable feeding and compare matched production periods. Investigate magnetic performance separately if capture has also changed.<\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p>If an electromagnet is missing iron, inspect the material presentation and real target distance before raising excitation. An unnecessarily deep or uneven layer can make capture harder. Improving feed distribution or correcting an excessive gap can help, provided lump clearance, mounting and the approved operating limits remain suitable.<\/p>\n<h3>When is stopping idle equipment worthwhile?<\/h3>\n<p><strong>Prioritize avoidable high-load hours when the approved control sequence allows shutdown and restart without losing protection or cooling.<\/strong> In the earlier example, removing four unnecessary hours per day from the 10 kW excitation branch saves 10 \u00d7 4 \u00d7 300 = <strong>12,000 kWh per year<\/strong>, or <strong>US$1,440<\/strong> at US$0.12\/kWh.<\/p>\n<p>That calculation covers the excitation branch only. Cooling or controls may still run, and restart can require a defined sequence. Arrange the interlocks so material cannot enter an unready separator and required cooling continues. Repeated manual switching around the protection system is not an energy-saving method.<\/p>\n<h3>When should you consider replacing an electromagnet with a permanent unit?<\/h3>\n<p><strong>Compare a permanent option when it can meet the same target at the actual working distance, throughput and cleaning duty.<\/strong> It removes the continuous coil-excitation load. The replacement may still need a cleaning-belt drive, and installation changes, maintenance and downtime affect the overall cost.<\/p>\n<p>Keep the electromagnet when the permanent candidate cannot meet the required capture conditions or when the process needs its specified field-control function. The <a href=\"https:\/\/www.corvelanmag.com\/permanent-vs-electromagnetic-separators\/\">permanent versus electromagnetic separator guide<\/a> covers that equipment choice. For an energy comparison, measure or estimate both complete packages under the same accepted separation task.<\/p>\n<p>A lower meter reading is useful only alongside a satisfactory product or protection result. Repeat the agreed target test and, where relevant, measure recovery, remaining contamination and good-product loss. If energy falls but the separation result fails, restore the accepted setting and work on feed, mechanical losses or a better-matched machine.<\/p>\n<\/section>\n<div class=\"cv-closing\"><p><strong>To budget magnetic separator power consumption, start with the whole electrical package and its real operating schedule.<\/strong> Permanent magnets eliminate excitation power, while drives, cooling and controls remain configuration-dependent. Use kWh for the bill, matched kWh\/t for production comparisons, and the separation result to decide whether a lower-energy option is useful.<\/p>\n<div class=\"cv-cta\"><p><strong>Need to compare the power requirements for your line?<\/strong> Send Corvelan your material and target iron, particle-size range, normal and peak throughput, working distance, operating hours, ambient conditions and available electrical supply. For an existing unit, include its motor and rectifier plates, cooling-load list and an energy log if available. We use the application and installation details to narrow the suitable configuration.<\/p><p>Start through our contact form, or email the drawings and nameplate photos to <a href=\"mailto:sales@corvelanmag.com\">sales@corvelanmag.com<\/a>.<\/p><p><a class=\"cv-button\" href=\"https:\/\/www.corvelanmag.com\/contact-us\/\">Discuss Your Separator Requirements<\/a><\/p><\/div>\n<\/div>\n<section class=\"cv-section\" id=\"faq\"><h2>Frequently asked questions about separator electricity use<\/h2>\n<div class=\"cv-faq-item\"><h3>Does 25% duty cycle mean the separator uses 25% of its rated power?<\/h3><p><strong>Only the affected load&#8217;s energy scales that way if it runs at the same input for exactly 25% of the stated period.<\/strong> \u201cDuty cycle\u201d can also describe an equipment thermal rating or electronic switching pattern. Establish what the quoted percentage means. A genuinely intermittent coil does not make continuously running drives, controls or cooling intermittent too.<\/p><\/div>\n<div class=\"cv-faq-item\"><h3>Why does the electricity meter keep moving after the conveyor stops?<\/h3><p><strong>The magnet, cooling system or controls may still be energized.<\/strong> Compare the control-state record with each supply&#8217;s meter. A conveyor stop is not necessarily a separator shutdown. Include required cooling after production stops; correct unnecessary excitation or other running through the approved control sequence.<\/p><\/div>\n<div class=\"cv-faq-item\"><h3>Does lower current prove that an energy-saving change worked?<\/h3><p><strong>No. Compare real input power or accumulated kWh, together with output and capture performance.<\/strong> Current can change because voltage, power factor, waveform or coil temperature changed. For example, a warm coil on a fixed-voltage supply can draw less current while operating at a different magnetic condition. Use matching operating states to interpret the change.<\/p><\/div>\n<div class=\"cv-faq-item\"><h3>Can I use the calculated average kW to size a generator?<\/h3><p><strong>Average kW is insufficient for generator sizing.<\/strong> The electrical design also needs simultaneous loads, motor starting, rectifier behavior, power factor, harmonic loading and permitted voltage changes. Give the generator designer the complete load schedule and starting sequence. Keep generator capacity in kVA and kW distinct from the annual energy figure in kWh.<\/p><\/div>\n<div class=\"cv-faq-item\"><h3>Is kWh per kilogram of recovered iron a better measure than kWh per tonne of feed?<\/h3><p><strong>It can help a recovery operation, but only when feed composition and the recovered product are comparable.<\/strong> A stream with less iron can produce a higher kWh\/kg value even with unchanged equipment performance. Record feed tonnes, iron content, recovered mass and product quality together. For occasional tramp-iron protection, successful removal of the agreed damaging targets is more useful than an energy ratio based on rare pieces.<\/p><\/div>\n<div class=\"cv-faq-item\"><h3>Does pneumatic or hydraulic cleaning make a permanent separator energy-free?<\/h3><p><strong>No. It shifts part of the energy use to the compressed-air or hydraulic supply.<\/strong> For a whole-system comparison, include the energy attributable to the air or hydraulic service over the same cleaning schedule. A shared compressor&#8217;s full motor rating is not the separator&#8217;s allocated load; use measured demand or a documented allocation method.<\/p><\/div>\n<\/section>\n<\/div>\n<script type=\"application\/ld+json\">\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does 25% duty cycle mean the separator uses 25% of its rated power?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Only the affected load's energy scales that way if it runs at the same input for exactly 25% of the stated period. \u201cDuty cycle\u201d can also describe an equipment thermal rating or electronic switching pattern. Establish what the quoted percentage means. A genuinely intermittent coil does not make continuously running drives, controls or cooling intermittent too.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why does the electricity meter keep moving after the conveyor stops?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The magnet, cooling system or controls may still be energized. Compare the control-state record with each supply's meter. A conveyor stop is not necessarily a separator shutdown. Include required cooling after production stops; correct unnecessary excitation or other running through the approved control sequence.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does lower current prove that an energy-saving change worked?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No. Compare real input power or accumulated kWh, together with output and capture performance. Current can change because voltage, power factor, waveform or coil temperature changed. For example, a warm coil on a fixed-voltage supply can draw less current while operating at a different magnetic condition. Use matching operating states to interpret the change.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use the calculated average kW to size a generator?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Average kW is insufficient for generator sizing. The electrical design also needs simultaneous loads, motor starting, rectifier behavior, power factor, harmonic loading and permitted voltage changes. Give the generator designer the complete load schedule and starting sequence. Keep generator capacity in kVA and kW distinct from the annual energy figure in kWh.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is kWh per kilogram of recovered iron a better measure than kWh per tonne of feed?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It can help a recovery operation, but only when feed composition and the recovered product are comparable. A stream with less iron can produce a higher kWh\/kg value even with unchanged equipment performance. Record feed tonnes, iron content, recovered mass and product quality together. For occasional tramp-iron protection, successful removal of the agreed damaging targets is more useful than an energy ratio based on rare pieces.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does pneumatic or hydraulic cleaning make a permanent separator energy-free?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No. It shifts part of the energy use to the compressed-air or hydraulic supply. For a whole-system comparison, include the energy attributable to the air or hydraulic service over the same cleaning schedule. A shared compressor's full motor rating is not the separator's allocated load; use measured demand or a documented allocation method.\"\n      }\n    }\n  ]\n}\n<\/script>\n","protected":false},"excerpt":{"rendered":"<p>Magnetic separator power consumption is the electricity used by the complete operating package: magnetic excitation, drives, cooling and controls. Permanent magnets need no electricity to maintain their field, but a rotating drum or self-cleaning belt still needs a drive. An electromagnet also needs power while its coil is energized. For a useful estimate, separate the [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":4319,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-5532","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/posts\/5532","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/comments?post=5532"}],"version-history":[{"count":1,"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/posts\/5532\/revisions"}],"predecessor-version":[{"id":5608,"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/posts\/5532\/revisions\/5608"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/media\/4319"}],"wp:attachment":[{"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/media?parent=5532"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/categories?post=5532"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/tags?post=5532"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}