{"id":5586,"date":"2026-11-22T06:33:47","date_gmt":"2026-11-21T22:33:47","guid":{"rendered":"https:\/\/www.corvelanmag.com\/?p=5586"},"modified":"2026-10-30T13:47:58","modified_gmt":"2026-10-30T05:47:58","slug":"magnetic-head-pulley-splitter-chute-design","status":"publish","type":"post","link":"https:\/\/www.corvelanmag.com\/fr\/magnetic-head-pulley-splitter-chute-design\/","title":{"rendered":"Conception de deux voies d\u2019\u00e9vacuation autour d\u2019une poulie magn\u00e9tique de t\u00eate"},"content":{"rendered":"\n<style>\n.corvelan-pulley-article{--accent:#34495e;--ink:#253444;--soft:#f3f5f7;color:var(--ink);font-family:inherit;line-height:1.75;overflow-wrap:anywhere;}\n.corvelan-pulley-article .article-intro,.corvelan-pulley-article .article-toc,.corvelan-pulley-article .article-section{padding:22px;margin:0 0 24px;border:1px solid #dce2e8;border-radius:10px;background:#fff;}\n.corvelan-pulley-article .article-intro,.corvelan-pulley-article .article-toc{background:var(--soft);}\n.corvelan-pulley-article .article-section{border-top:3px solid var(--accent);box-shadow:0 2px 8px rgba(37,52,68,.04);scroll-margin-top:110px;}\n.corvelan-pulley-article h2{font-size:1.6em;line-height:1.3;color:var(--ink);margin:0 0 18px;}\n.corvelan-pulley-article h3{font-size:1.2em;line-height:1.4;margin:26px 0 12px;scroll-margin-top:110px;}\n.corvelan-pulley-article p{margin:0 0 16px;}\n.corvelan-pulley-article ul,.corvelan-pulley-article ol{padding-inline-start:24px;margin:0 0 18px;}\n.corvelan-pulley-article li{margin-bottom:10px;}\n.corvelan-pulley-article a{color:#244c6a;text-decoration:underline;text-underline-offset:3px;}\n.corvelan-pulley-article a:hover{color:#172c3c;}\n.corvelan-pulley-article a:focus-visible,.corvelan-pulley-article .table-scroll:focus-visible{outline:3px solid #52758f;outline-offset:4px;}\n.corvelan-pulley-article .article-toc li{margin-bottom:8px;}\n.corvelan-pulley-article .article-media{display:block;float:none;clear:both;margin:20px 0;}\n.corvelan-pulley-article .article-media img{display:block;float:none;max-width:100%;height:auto;margin-inline:auto;}\n.corvelan-pulley-article .table-scroll{overflow-x:auto;margin:20px 0;}\n.corvelan-pulley-article table{border-collapse:collapse;min-width:560px;width:100%;font-size:1em;}\n.corvelan-pulley-article th,.corvelan-pulley-article td{padding:12px 14px;text-align:left;vertical-align:top;border:1px solid #dce2e8;}\n.corvelan-pulley-article th{background:var(--accent);color:#fff;}\n.corvelan-pulley-article tbody tr:nth-child(even){background:#f7f9fa;}\n.corvelan-pulley-article #faqs h3{border-top:1px solid #dce2e8;padding-top:20px;}\n.corvelan-pulley-article .article-section>:last-child,.corvelan-pulley-article .article-intro>:last-child,.corvelan-pulley-article .article-toc>:last-child{margin-bottom:0;}\n@media(max-width:767px){.corvelan-pulley-article .article-intro,.corvelan-pulley-article .article-toc,.corvelan-pulley-article .article-section{padding:18px;}.corvelan-pulley-article h2{font-size:1.4em;}}\n<\/style>\n<article class=\"corvelan-pulley-article\" lang=\"en\"><div class=\"article-intro\"><p><strong>Design the normal-material chute and the iron chute as two separate paths, with an adjustable divider between them.<\/strong> Start with where each stream actually travels at the conveyor head. Then keep the streams apart all the way to their collection points.<\/p>\n<p>Good magnetic head pulley splitter chute design does more than catch iron. It gives captured iron room to release, keeps useful material out of the iron bin, and prevents either stream from bouncing into the other. A strong magnet can still give a poor result if the discharge arrangement sends captured metal back into the product.<\/p>\n<\/div><nav aria-label=\"On this page\" class=\"article-toc\"><p><strong>On this page<\/strong><\/p><ul><li><a href=\"#discharge-paths\">How should the two discharge paths work?<\/a><\/li><li><a href=\"#measurements\">What must you measure before drawing the chutes?<\/a><\/li><li><a href=\"#splitter-position\">Where should the adjustable splitter sit?<\/a><\/li><li><a href=\"#belt-speed\">How does belt speed change the product path?<\/a><\/li><li><a href=\"#separate-chutes\">How do you keep the streams separate after the splitter?<\/a><\/li><li><a href=\"#layout-trial\">How should you test the finished discharge layout?<\/a><\/li><li><a href=\"#drawing-handover\">What should the fabrication drawing and handover include?<\/a><\/li><li><a href=\"#faqs\">Frequently asked questions<\/a><\/li><\/ul><\/nav><section class=\"article-section\" id=\"discharge-paths\"><h2>How should the two discharge paths work?<\/h2>\n<div class=\"article-media\"><img loading=\"lazy\" src=\"https:\/\/www.corvelanmag.com\/wp-content\/uploads\/2026\/09\/coverlan-magnetic-pulley-working-principle.webp\" alt=\"Head pulley illustration with a splitter and separate material discharge paths\" width=\"1200\" height=\"900\" loading=\"lazy\" decoding=\"async\" style=\"display:block;max-width:100%;height:auto;object-fit:contain;\"><\/div>\n<p><strong>Normal material leaves toward the front of the conveyor; captured iron stays with the belt longer and releases below or behind that first stream.<\/strong> The divider plate, often called a splitter, sits between these paths. It directs each stream into its own chute.<\/p>\n<p>As the belt turns around the pulley, free-flowing non-magnetic material leaves its surface. Its forward speed and gravity carry it toward the product chute. Magnetic iron and steel stay against the belt and travel farther around the pulley. As the returning belt moves beyond the useful magnetic reach, the retained metal can fall into the iron chute.<\/p>\n<p>The release point depends on the magnetic arrangement, belt path and target piece. Some head pulleys have a magnetic field around their full circumference. Do not assume that every pulley has a fixed internal magnetic sector with one universal release angle.<\/p>\n<p>For a tramp-iron removal job, the forward stream is the useful product and the iron stream is the reject. In an iron-recovery process, the magnetic stream may be the valuable product. Label the two outlets by their actual destination so that drawings and trial records stay clear.<\/p>\n<p>Our <a href=\"https:\/\/www.corvelanmag.com\/products\/magnetic-pulley-separator\/\">magnetic head pulley separator<\/a> page covers the pulley and conveyor interfaces. Here, the design task is to make those two discharge paths work together. Follow the iron beyond the magnetic surface: <strong>retaining a piece on the belt and delivering it into the correct bin are two different results.<\/strong><\/p>\n<\/section><section class=\"article-section\" id=\"measurements\"><h2>What must you measure before drawing the chutes?<\/h2>\n<p><strong>Get a side view and an end view of the conveyor head, then record the operating range beside the dimensions.<\/strong> Belt width alone cannot show where the material lands or whether the iron has room to leave.<\/p>\n<p>Use the original conveyor drawing where available. Add measurements from the installed machine during a safe shutdown. For a new line, use the proposed pulley, belt and receiving-equipment drawings together.<\/p>\n<div aria-label=\"Data table 1\" class=\"table-scroll\" role=\"region\" tabindex=\"0\"><table>\n<thead>\n<tr>\n<th scope=\"col\">Start with this raw information<\/th>\n<th scope=\"col\">Record these details<\/th>\n<th scope=\"col\">How it changes the layout<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Conveyor-head drawing and site measurements<\/td>\n<td>Pulley center, outside diameter including lagging, belt thickness, belt wrap and return-belt line<\/td>\n<td>Establishes the rotating parts and the space beneath them<\/td>\n<\/tr>\n<tr>\n<td>Drive data and an actual belt-speed reading<\/td>\n<td>Lowest, normal and highest operating speeds<\/td>\n<td>Defines the range of product discharge paths<\/td>\n<\/tr>\n<tr>\n<td>Representative feed and loading records<\/td>\n<td>Normal and peak layer depth, particle sizes, largest lumps, moisture and stickiness<\/td>\n<td>Shows how wide or irregular the stream may become<\/td>\n<\/tr>\n<tr>\n<td>Actual tramp pieces or representative samples<\/td>\n<td>Length, width, shape, magnetic response and attached non-magnetic material<\/td>\n<td>Defines the space needed for capture and release<\/td>\n<\/tr>\n<tr>\n<td>Existing head-end equipment<\/td>\n<td>Scrapers, idlers, brackets, guards, liners and fasteners<\/td>\n<td>Exposes parts that may strip, trap or redirect iron<\/td>\n<\/tr>\n<tr>\n<td>Receiving chute and bin drawings<\/td>\n<td>Inlet positions, usable collection space, access and bin-removal route<\/td>\n<td>Shows whether both streams can remain separate after leaving the pulley<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<p>Record speed and material depth <strong>at the same operating condition<\/strong>. A low-speed test with a shallow feed does not describe low-speed production with a much deeper layer. Include surges if they occur during normal loading.<\/p>\n<p>For an existing conveyor, inspect the return side as carefully as the forward outlet. A new splitter can fit in the side view yet clash with a return idler, cleaner or cross-member. The end view also matters: a narrow divider or an open side gap can let material bypass a split that looks correct from the side.<\/p>\n<p>For a new line, reserve collection and maintenance space before fixing the receiving conveyor position. Moving an outlet on a drawing is usually simpler than routing a second chute through a finished support frame.<\/p>\n<\/section><section class=\"article-section\" id=\"splitter-position\"><h2>Where should the adjustable splitter sit?<\/h2>\n<p><strong>Place the splitter between the observed product stream and the iron-release stream, with room to adjust it along the conveyor and vertically.<\/strong> Its tip must divide the streams without becoming a trap between the belt and a long or irregular iron piece.<\/p>\n<p>Use the pulley center as a drawing reference. Mark the direction of belt travel and dimension the splitter tip from that reference. Terms such as \u201cmove it back\u201d become confusing when one person means toward the pulley and another means toward the receiving chute.<\/p>\n<p>Develop the position in this order:<\/p>\n<ol>\n<li><strong>Mark the moving belt and hardware.<\/strong> Include the return-belt line, splices, cleats if fitted, and expected belt movement. Keep the splitter and its full adjustment range clear of them.<\/li>\n<li><strong>Mark the product-stream limits.<\/strong> Use the relevant speed and feed conditions, including the lowest and highest normal discharge paths.<\/li>\n<li><strong>Mark where the target iron travels and releases.<\/strong> Include long pieces and different orientations, rather than using one convenient short bolt.<\/li>\n<li><strong>Locate a trial tip position between the two ranges.<\/strong> Give the mounting enough movement to test nearby positions. Keep the divider effective across the stream width.<\/li>\n<li><strong>Test, then dimension the accepted setting.<\/strong> Record the position and the operating conditions that produced it. If the streams overlap substantially, improve the feed or change the layout before fixing a final tip position.<\/li>\n<\/ol>\n<p>To put observed paths onto a drawing, use a fixed side-view camera outside the guarded area and relate the view to known dimensions in the conveyor drawing. Fit any reference markers during shutdown. Trace the outer limits from repeated runs at the chosen speeds and loads, rather than drawing a single line through one particle. For a new line, use the product trajectory to reserve chute space and a representative pulley trial to establish the iron-release path. Keep the layout adjustable until both are resolved.<\/p>\n<h3 id=\"set-the-gap-around-the-real-iron-pieces\">Set the gap around the real iron pieces<\/h3>\n<p>The gap between the splitter tip and the lower belt run must allow the expected iron to pass. A long nail, bent strip or piece carrying attached material can need more space than its smallest dimension suggests. Belt movement, installation tolerances and wear also use part of that space.<\/p>\n<p>An unnecessarily large gap can let useful material enter the iron chute. A tight gap can trap a piece and damage the belt. <strong>Choose the clearance from the target pieces and the moving belt, then prove the split with material.<\/strong> It is not a universal millimeter setting or a particle-size cut point.<\/p>\n<p>The <a href=\"https:\/\/eriez.com\/Documents\/Literature\/IOMs\/Magnetic-Separation\/SM-240-Eriez-Magnetic-Pulley-IOM.pdf\" rel=\"nofollow noopener\" target=\"_blank\">Eriez SM-240E magnetic-pulley manual<\/a>, on printed page 6, describes adjustment in both directions and explains this clearance trade-off.<\/p>\n<h3 id=\"keep-the-setting-adjustable-and-repeatable\">Keep the setting adjustable and repeatable<\/h3>\n<p>Use a mounting that holds its position under operating vibration and allows safe access for adjustment. Add readable position marks or dimensioned reference points so maintenance staff can restore an accepted setting after replacing a liner.<\/p>\n<p>Make the tip and adjacent wear surfaces accessible for inspection. A bent edge or a thick replacement liner can change the working gap even when the mounting bolts return to the same slots.<\/p>\n<\/section><section class=\"article-section\" id=\"belt-speed\"><h2>How does belt speed change the product path?<\/h2>\n<p><strong>Higher discharge speed can carry free-flowing product farther forward, so the chute must accept a range of paths rather than one nominal landing point.<\/strong> Belt inclination, the point where particles leave the belt, and the shape of the loaded material also affect that range.<\/p>\n<p>Plot the lowest and highest operating conditions on the same side view. If both streams strike a shared wall before reaching separate outlets, changing the splitter alone may leave a rebound path between them. <a href=\"https:\/\/foundations.martin-eng.com\/knowledge\/material-trajectory\" rel=\"nofollow noopener\" target=\"_blank\">Martin Engineering&#8217;s explanation of material trajectory<\/a> also highlights the effect of chute-wall friction on what happens after the first impact.<\/p>\n<h3 id=\"a-simple-free-flight-example\">A simple free-flight example<\/h3>\n<p>Suppose a non-magnetic particle has already left a belt <strong>horizontally<\/strong>, with a vertical drop of 0.60 m to a chosen reference level. Ignore air resistance and collisions. Using the basic <a href=\"https:\/\/openstax.org\/books\/physics\/pages\/5-3-projectile-motion\" rel=\"nofollow noopener\" target=\"_blank\">projectile-motion equations<\/a>:<\/p>\n<ul>\n<li>Time to fall: <strong>t = \u221a(2h \u00f7 g)<\/strong><\/li>\n<li>Forward travel: <strong>x = v \u00d7 t<\/strong><\/li>\n<\/ul>\n<p>Here, h is the drop in meters, g is 9.81 m\/s\u00b2, v is the horizontal release speed in m\/s, and t is time in seconds. The fall time is \u221a(1.20 \u00f7 9.81), or about <strong>0.350 s<\/strong>.<\/p>\n<div aria-label=\"Data table 2\" class=\"table-scroll\" role=\"region\" tabindex=\"0\"><table>\n<thead>\n<tr>\n<th scope=\"col\">Horizontal release speed<\/th>\n<th scope=\"col\">Forward travel at the 0.60 m drop<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>1.2 m\/s<\/td>\n<td>About 0.42 m<\/td>\n<\/tr>\n<tr>\n<td>1.8 m\/s<\/td>\n<td>About 0.63 m<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<p>The difference is about <strong>0.21 m<\/strong>. In this example, a receiving opening centered only on the slower path could be poorly placed for the faster one. Use the comparison to reserve space and choose trial observation points.<\/p>\n<p>This calculation starts at a defined horizontal release point. Real bulk material can leave at another angle, spread, clump or hit a wall. Iron held by the magnet follows a different motion. Establish those actual paths with the intended pulley, feed and belt arrangement before fixing the chute geometry.<\/p>\n<p>Slowing the belt also needs a loading check. At unchanged feed rate, less belt travel per second means more material must occupy each length of belt. The deeper layer can make buried iron harder to capture. <strong>Record feed rate, depth and speed together when testing a speed change.<\/strong><\/p>\n<\/section><section class=\"article-section\" id=\"separate-chutes\"><h2>How do you keep the streams separate after the splitter?<\/h2>\n<p><strong>Carry the separation through both chutes to their receiving points.<\/strong> A correct split at the tip is lost if iron rebounds off a wall, passes around an open divider edge, or drops into a bin that also receives product.<\/p>\n<p>Trace each stream through its first impact, every change of direction, and the final outlet. In the side view, look for a wall that can throw iron across the product path. In the end view, look for side gaps and a stream wider than the divider. Shape the guides so that material continues into its own outlet rather than striking a flat face aimed toward the other stream.<\/p>\n<p>The product chute needs room for the peak product flow and the spread of that flow. The iron chute needs room for the largest expected piece and any attached material. Keep abrupt restrictions and ledges out of the iron route, especially where a long piece could bridge across the opening.<\/p>\n<p>For damp or cohesive feed, chute angle and liner choice need material-specific work. A smooth-looking wall may still hold a sticky layer that narrows the outlet. Compare the proposed liner with representative feed under the expected moisture conditions. If buildup changes the split, address that surface or feed condition before repeatedly moving the divider.<\/p>\n<p>Also allow for a partly full collection bin. A pile of iron must not rise into the release path or redirect pieces toward the return belt. Give staff a practical way to see the level and remove the bin before that happens. Guarding and collection access must suit the full, working arrangement.<\/p>\n<h3 id=\"check-materials-and-belt-cleaner-positions\">Check materials and belt-cleaner positions<\/h3>\n<p>Near the magnetic working area, use components with suitable non-magnetic properties. Include the splitter, liners, bolts and brackets in that review. Specify and verify the required magnetic behavior of the finished parts, including replacement wear parts. Steel parts close to the field can attract and hold iron in unintended places.<\/p>\n<p>Locate existing belt cleaners on the head-end drawing. A cleaner that strips iron off before the belt reaches the intended iron route can defeat the arrangement. Cleaning after the planned release is a different job. Design the cleaner, any belt-mounted wiper, and the collection chute together so the removed material has a defined destination.<\/p>\n<p>If sticky carryback or tangled feed prevents two stable paths, stop treating the splitter as the only adjustment. Improve feed presentation or review another separation point. A separate drum stage can provide more control when the conveyor head cannot provide enough room; our <a href=\"https:\/\/www.corvelanmag.com\/types-of-magnetic-separators\/\">guide to magnetic separator types<\/a> explains that equipment choice.<\/p>\n<\/section><section class=\"article-section\" id=\"layout-trial\"><h2>How should you test the finished discharge layout?<\/h2>\n<p><strong>Test both iron delivery into its own outlet and useful-product loss into that outlet.<\/strong> Watch where a missed piece first takes the wrong path. That tells you whether to change capture conditions, the splitter, the chute or the release arrangement.<\/p>\n<p>Prepare the trial before introducing targets. Stop and isolate the conveyor and connected equipment before moving internal parts or accessing the collection area. A permanent magnetic pulley remains magnetic with the drive off, so secure nearby ferrous parts and keep hands out of attraction and pinch points.<\/p>\n<p>Use a controlled test installation or isolate vulnerable downstream equipment and collect all trial output. Set up observation through guarded access with a fixed camera where needed. Prepare target introduction and collection so nobody has to hand-feed pieces near moving machinery or reach into a live chute.<\/p>\n<p>Then follow a written trial sequence:<\/p>\n<ol>\n<li><strong>Define the targets and the result required.<\/strong> List piece types, sizes and orientations. For equipment protection, identify the damaging pieces that must enter the iron outlet. For iron recovery, include the required magnetic-product quality.<\/li>\n<li><strong>Record the starting setup.<\/strong> Note feed, moisture, throughput, belt speed, layer depth, belt condition, and splitter coordinates and clearance.<\/li>\n<li><strong>Run representative conditions.<\/strong> Include normal and peak loading, relevant speed limits, and targets at the center and edges of the feed. Include buried positions where they occur in production.<\/li>\n<li><strong>Collect and inspect both streams.<\/strong> Account for every introduced target. Separately measure useful material carried into the iron outlet. Stop and investigate any unaccounted target before returning the line to service.<\/li>\n<li><strong>Change one setting, then repeat the affected conditions.<\/strong> Keep the feed comparable. Restore guards and the agreed operating setup before production resumes.<\/li>\n<\/ol>\n<p>Choose sample quantities, repeat runs and acceptance limits for the actual protection or recovery duty. A short successful run is useful setup evidence; the final arrangement must also handle the defined operating range.<\/p>\n<h3 id=\"separate-capture-from-delivery-into-the-iron-bin\">Separate capture from delivery into the iron bin<\/h3>\n<p>Consider an illustrative trial with <strong>20 identifiable steel targets<\/strong>. Suppose guarded observation shows 19 following the belt into the retained-iron path, but collection finds only 18 in the iron outlet. One of the retained pieces crossed back into product after a wall impact.<\/p>\n<ul>\n<li>Observed capture: <strong>19 \u00f7 20 = 95%<\/strong>.<\/li>\n<li>Delivery into the iron outlet: <strong>18 \u00f7 20 = 90%<\/strong>.<\/li>\n<\/ul>\n<p>The second figure describes the completed removal job. The difference points to a discharge problem as well as a missed-capture problem. Increasing magnetic strength would not, by itself, correct the observed wall rebound.<\/p>\n<p>If the agreed trial requirement is that all 20 targets reach the iron outlet, this setting fails. Correct the missed capture and the rebound path, then repeat the trial under the same defined conditions.<\/p>\n<p>Now suppose the same trial contained 100 kg of useful non-magnetic feed, and 0.60 kg of that material entered the iron outlet. Useful-product loss is <strong>0.60 \u00f7 100 \u00d7 100 = 0.60%<\/strong>. That denominator is the useful feed, not the total weight of iron plus product in the bin. Record the acceptable loss before choosing the final splitter setting.<\/p>\n<h3 id=\"use-the-failure-location-to-choose-the-next-change\">Use the failure location to choose the next change<\/h3>\n<div aria-label=\"Data table 3\" class=\"table-scroll\" role=\"region\" tabindex=\"0\"><table>\n<thead>\n<tr>\n<th scope=\"col\">What you observe<\/th>\n<th scope=\"col\">Evidence to obtain<\/th>\n<th scope=\"col\">Next action<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Iron leaves with product without following the belt<\/td>\n<td>Target position in the layer, magnetic response, depth and speed<\/td>\n<td>Address capture and feed presentation before moving the chute<\/td>\n<\/tr>\n<tr>\n<td>Iron follows the belt, then crosses into product<\/td>\n<td>Guarded video of the splitter and first wall impact<\/td>\n<td>Adjust the split or reshape the rebound path<\/td>\n<\/tr>\n<tr>\n<td>Iron stays at the underside or travels along the return belt<\/td>\n<td>Release location and the shape of the retained piece<\/td>\n<td>Review the release and cleaning arrangement<\/td>\n<\/tr>\n<tr>\n<td>Useful material increasingly enters the iron chute<\/td>\n<td>Moisture, buildup, carryback and current tip position<\/td>\n<td>Remove the cause of delayed product release, then retest the split<\/td>\n<\/tr>\n<tr>\n<td>Separation fails only as the bin fills<\/td>\n<td>Pile height and the route of the bouncing pieces<\/td>\n<td>Change collection capacity or emptying arrangements<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<p>Keep the accepted run record with the drawing. If feed or belt speed later changes, repeat the affected part of the trial rather than assuming that the old splitter position still works.<\/p>\n<\/section><section class=\"article-section\" id=\"drawing-handover\"><h2>What should the fabrication drawing and handover include?<\/h2>\n<p><strong>Show the accepted splitter position, its adjustment limits, and both discharge routes on the same drawing.<\/strong> A pulley drawing without the surrounding chutes cannot tell the installer whether the separated iron will reach the right collection point.<\/p>\n<p>Include these details in the drawing and its attached operating record:<\/p>\n<ul>\n<li><strong>Common dimensions:<\/strong> pulley center, direction of rotation, belt and return-belt lines, relevant operating movement, and the position of nearby equipment.<\/li>\n<li><strong>Two material paths:<\/strong> product-stream limits and the observed iron-release area under the specified speed and feed conditions.<\/li>\n<li><strong>Splitter details:<\/strong> tip coordinates, working clearance, adjustment travel, locking method, material and replaceable wear parts.<\/li>\n<li><strong>Two complete outlets:<\/strong> chute openings, side containment, liner thickness, impact surfaces and final collection points.<\/li>\n<li><strong>Access and collection:<\/strong> guarding, inspection points, safe adjustment access and the route for removing a filled bin.<\/li>\n<li><strong>Scope of supply:<\/strong> who provides the pulley, splitter, chutes, liners, guards, bins and any required monitoring or interlocks.<\/li>\n<li><strong>Accepted operating conditions:<\/strong> trial records, target descriptions, useful-product loss and the conditions that trigger another trial.<\/li>\n<\/ul>\n<p>For a new line, place the receiving equipment around the required split. For a retrofit, decide early whether the existing head-end structure allows that split. If the iron route would pass through the product stream or interfere with the return belt, change the collection arrangement or the separation point before releasing the drawing for fabrication.<\/p>\n<p><strong>The right magnetic head pulley splitter chute design gives each stream a clear path from the pulley to its destination.<\/strong> Set the divider from the real product and iron paths, leave usable adjustment, and choose the final setting from both iron removal and product-loss results.<\/p>\n<p>To discuss the pulley and discharge arrangement with Corvelan, use the message field on our <a href=\"https:\/\/www.corvelanmag.com\/contact-us\/\">contact page<\/a>. Start with the material, belt width and speed range, normal and peak depth, target iron, and available collection space. Mention whether you have a conveyor-head drawing so we can arrange the next exchange of details.<\/p>\n<\/section><section class=\"article-section\" id=\"faqs\"><h2>Frequently asked questions<\/h2>\n<h3 id=\"can-we-keep-the-existing-product-chute\">Can we keep the existing product chute?<\/h3>\n<p><strong>Yes, if it accepts the product stream across the intended operating range and leaves an independent route for the iron.<\/strong> Inspect the internal impact surfaces and side gaps as well as the outer shell. Keeping the shell may still require a new internal divider or liner arrangement to stop rebound into product.<\/p>\n<h3 id=\"why-can-round-steel-pieces-linger-below-the-pulley\">Why can round steel pieces linger below the pulley?<\/h3>\n<p><strong>A round piece can roll near the lower tangent area rather than leave cleanly with the returning belt.<\/strong> Locate it using guarded observation: rolling near the pulley and sticking farther along the return belt call for different changes. The pulley designer may need to review a suitable belt wiper, cleat or magnetic extension together with the iron chute. Moving the bin lower will not necessarily resolve the release problem.<\/p>\n<h3 id=\"can-one-splitter-setting-cover-two-different-materials\">Can one splitter setting cover two different materials?<\/h3>\n<p><strong>Use one setting only after both materials meet the required iron-removal and product-loss results at that setting.<\/strong> Equal belt speeds do not establish equal discharge behavior. A dry granular feed and a damp, clinging feed can take different paths. Where separate settings work better, record the material, speed, depth and splitter coordinates as a repeatable setup.<\/p>\n<h3 id=\"what-if-the-iron-bin-sits-directly-under-the-product-outlet\">What if the iron bin sits directly under the product outlet?<\/h3>\n<p><strong>Keep the streams in separate guides until they reach separate receiving points.<\/strong> They must not merge above the bin and rely on a second divider to sort them again. If there is no room to route the iron around the product chute without obstructing the return belt or access, change the collection position or reconsider the separation point.<\/p><\/section><\/article>\n<script type=\"application\/ld+json\">\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can we keep the existing product chute?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, if it accepts the product stream across the intended operating range and leaves an independent route for the iron. Inspect the internal impact surfaces and side gaps as well as the outer shell. Keeping the shell may still require a new internal divider or liner arrangement to stop rebound into product.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why can round steel pieces linger below the pulley?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A round piece can roll near the lower tangent area rather than leave cleanly with the returning belt. Locate it using guarded observation: rolling near the pulley and sticking farther along the return belt call for different changes. The pulley designer may need to review a suitable belt wiper, cleat or magnetic extension together with the iron chute. Moving the bin lower will not necessarily resolve the release problem.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can one splitter setting cover two different materials?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Use one setting only after both materials meet the required iron-removal and product-loss results at that setting. Equal belt speeds do not establish equal discharge behavior. A dry granular feed and a damp, clinging feed can take different paths. Where separate settings work better, record the material, speed, depth and splitter coordinates as a repeatable setup.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What if the iron bin sits directly under the product outlet?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Keep the streams in separate guides until they reach separate receiving points. They must not merge above the bin and rely on a second divider to sort them again. If there is no room to route the iron around the product chute without obstructing the return belt or access, change the collection position or reconsider the separation point.\"\n      }\n    }\n  ]\n}\n<\/script>\n","protected":false},"excerpt":{"rendered":"<p>Design the normal-material chute and the iron chute as two separate paths, with an adjustable divider between them. Start with where each stream actually travels at the conveyor head. Then keep the streams apart all the way to their collection points. Good magnetic head pulley splitter chute design does more than catch iron. It gives [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":4257,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-5586","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/posts\/5586","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/comments?post=5586"}],"version-history":[{"count":1,"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/posts\/5586\/revisions"}],"predecessor-version":[{"id":5636,"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/posts\/5586\/revisions\/5636"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/media\/4257"}],"wp:attachment":[{"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/media?parent=5586"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/categories?post=5586"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.corvelanmag.com\/fr\/wp-json\/wp\/v2\/tags?post=5586"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}