{"id":5512,"date":"2026-11-02T06:21:34","date_gmt":"2026-11-01T22:21:34","guid":{"rendered":"https:\/\/www.corvelanmag.com\/?p=5512"},"modified":"2026-10-30T12:44:12","modified_gmt":"2026-10-30T04:44:12","slug":"magnetic-separator-not-removing-iron","status":"publish","type":"post","link":"https:\/\/www.corvelanmag.com\/ru\/magnetic-separator-not-removing-iron\/","title":{"rendered":"\u041c\u0430\u0433\u043d\u0438\u0442\u043d\u044b\u0439 \u0441\u0435\u043f\u0430\u0440\u0430\u0442\u043e\u0440 \u043d\u0435 \u0438\u0437\u0432\u043b\u0435\u043a\u0430\u0435\u0442 \u0436\u0435\u043b\u0435\u0437\u043e\u0441\u043e\u0434\u0435\u0440\u0436\u0430\u0449\u0438\u0435 \u043f\u0440\u0438\u043c\u0435\u0441\u0438: \u043f\u043e\u0438\u0441\u043a \u0438 \u0443\u0441\u0442\u0440\u0430\u043d\u0435\u043d\u0438\u0435 \u043d\u0435\u0438\u0441\u043f\u0440\u0430\u0432\u043d\u043e\u0441\u0442\u0435\u0439"},"content":{"rendered":"\n<style>\n.corvelan-iron-guide{--ink:#20262e;--accent:#465360;--soft:#f5f6f7;--line:#d7dde2;color:var(--ink);font:inherit;font-size:17px;line-height:1.75;overflow-wrap:anywhere}\n.corvelan-iron-guide section,.corvelan-iron-guide .answer,.corvelan-iron-guide nav{box-sizing:border-box;padding:22px;margin:0 0 24px;border:1px solid var(--line);border-radius:16px;background:#fff}\n.corvelan-iron-guide section{border-top:4px solid var(--accent);box-shadow:0 2px 8px #20262e08;scroll-margin-top:100px}\n.corvelan-iron-guide .answer,.corvelan-iron-guide nav{background:var(--soft)}\n.corvelan-iron-guide h2{font-size:30px;line-height:1.3;margin:0 0 16px;color:var(--ink)}\n.corvelan-iron-guide h3{font-size:24px;line-height:1.35;margin:26px 0 12px;color:var(--ink)}\n.corvelan-iron-guide p{margin:0 0 16px}.corvelan-iron-guide p:last-child{margin-bottom:0}\n.corvelan-iron-guide ul,.corvelan-iron-guide ol{padding-left:24px;margin:12px 0 18px}.corvelan-iron-guide li{margin-bottom:10px}\n.corvelan-iron-guide a{color:#283d4f;text-decoration:underline;text-underline-offset:3px}.corvelan-iron-guide a:focus-visible,.corvelan-iron-guide [tabindex]:focus-visible{outline:3px solid #465360;outline-offset:4px}\n.corvelan-iron-guide nav ol{margin-bottom:0}.corvelan-iron-guide nav p{font-weight:700}\n.corvelan-iron-guide .table-scroll{overflow-x:auto;margin:18px 0;-webkit-overflow-scrolling:touch}\n.corvelan-iron-guide table{width:100%;min-width:620px;border-collapse:collapse;font-size:inherit;line-height:1.6}\n.corvelan-iron-guide th,.corvelan-iron-guide td{text-align:left;vertical-align:top;padding:12px;border:1px solid var(--line)}\n.corvelan-iron-guide th{background:var(--soft);font-weight:700}.corvelan-iron-guide tbody tr:nth-child(even){background:#fafbfc}\n.corvelan-iron-guide .article-media{display:block;float:none;clear:both;margin:20px 0}\n.corvelan-iron-guide .article-media img{display:block;float:none;max-width:100%;height:auto;margin-inline:auto}\n.corvelan-iron-guide .faq h3{padding-top:20px;border-top:1px solid var(--line)}\n@media(max-width:768px){.corvelan-iron-guide{font-size:16px}.corvelan-iron-guide section,.corvelan-iron-guide .answer,.corvelan-iron-guide nav{padding:18px;border-radius:12px;margin-bottom:18px}.corvelan-iron-guide section{border-top-width:3px}.corvelan-iron-guide h2{font-size:24px}.corvelan-iron-guide h3{font-size:20px}}\n<\/style>\n<article class=\"corvelan-iron-guide\">\n<div class=\"answer\"><p><strong>If your magnetic separator is not removing iron, first find where separation fails: capture, holding, discharge, or contamination added farther down the line.<\/strong> Then compare the missed iron, material depth, working distance and operating conditions with the last acceptable run. Buying a stronger magnet before locating the failure can leave the same problem in place.<\/p>\n<p>Start with the symptom below. Observe moving equipment from outside the guards. Before reaching in, cleaning, measuring clearances or adjusting parts, stop and isolate the machine and its connected feeds. <strong>A permanent magnet remains magnetic after electrical isolation:<\/strong> keep hands and loose steel tools away from pinch points.<\/p><\/div>\n<nav aria-label=\"Article contents\"><p>On this page<\/p><ol><li><a href=\"#first-checks\">What should you check first when iron gets through?<\/a><\/li><li><a href=\"#target-response\">Does the missed material respond to a magnet?<\/a><\/li><li><a href=\"#distance-depth-speed\">Are distance, burden depth or speed causing the misses?<\/a><\/li><li><a href=\"#overband-discharge\">Why does an overband magnet pick up iron and then drop it?<\/a><\/li><li><a href=\"#dry-drum\">What should you inspect on a dry magnetic drum?<\/a><\/li><li><a href=\"#filter-cleaning\">Why does a magnetic filter work better just after cleaning?<\/a><\/li><li><a href=\"#magnetic-system\">When should you suspect the magnetic system itself?<\/a><\/li><li><a href=\"#prove-removal\">How do you prove that iron removal has improved?<\/a><\/li><li><a href=\"#change-setup\">When should you change the setup or separator?<\/a><\/li><li><a href=\"#faq\">Frequently asked questions<\/a><\/li><\/ol><\/nav>\n<section id=\"first-checks\"><h2>What should you check first when iron gets through?<\/h2>\n<div class=\"article-media\"><img loading=\"lazy\" src=\"https:\/\/www.corvelanmag.com\/wp-content\/uploads\/2026\/09\/cross-belt-magnetic-separator-hero-202609201742-88d91d.webp\" alt=\"Self-cleaning overband separator with an endless belt and motor drive\" width=\"1200\" height=\"900\" loading=\"lazy\" decoding=\"async\" style=\"display:block;max-width:100%;height:auto;object-fit:contain;\"><\/div>\n<p><strong>Check what changed and whether the iron is missed completely, captured and lost, or added after separation.<\/strong> These observations narrow the investigation before you change equipment settings.<\/p>\n\n<div class=\"table-scroll\" role=\"region\" tabindex=\"0\" aria-label=\"Iron removal symptoms and checks\"><table><thead><tr>\n<th scope=\"col\">What you observe<\/th><th scope=\"col\">Start here<\/th><th scope=\"col\">What helps distinguish the cause<\/th>\n<\/tr><\/thead><tbody>\n<tr><td>Poor removal from the first production run<\/td><td>Target response, installation gap and feed path<\/td><td>Compare actual material and installation with the selection data<\/td><\/tr>\n<tr><td>Results worsen after output increases<\/td><td>Peak material depth, distribution and speed<\/td><td>Compare a stable lower feed rate with the higher rate<\/td><\/tr>\n<tr><td>Removal improves after cleaning, then declines<\/td><td>Accumulated iron, blocked openings and cleaning interval<\/td><td>Record collection and missed iron through one operating cycle<\/td><\/tr>\n<tr><td>Iron lifts, then falls into the product<\/td><td>Cleaning belt, clearance, splitter and collection point<\/td><td>Follow the captured iron all the way into its bin<\/td><\/tr>\n<tr><td>Performance changes immediately after maintenance<\/td><td>Parts, settings and connections that were disturbed<\/td><td>Compare the restored assembly with its drawing and previous settings<\/td><\/tr>\n<tr><td>Product is clean at the separator but dirty farther downstream<\/td><td>Wear or contamination between the two sample points<\/td><td>Take samples before and after each intervening machine<\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p>Save a sample of the missed material and record when the problem started. Use the same time window for feed rate, speed, cleaning status and product sampling. A photograph of collected iron alone leaves the missed fraction unknown.<\/p>\n<p>For intermittent failures, record the event rather than only the shift average. A short feed surge, a stalled cleaning belt or a full collection bin may disappear before a later inspection.<\/p><\/section>\n<section id=\"target-response\"><h2>Does the missed material respond to a magnet?<\/h2>\n<p><strong>Test the actual missed pieces or particles away from the machine before treating the problem as a loss of magnetic strength.<\/strong> Strongly attracted free iron, weakly magnetic particles and iron locked inside another particle need different treatment.<\/p>\n<p>Collect the missed fraction from a safe sampling point. Record its size, shape and whether it is loose or attached to product. Use a small magnet on a contained sample to screen its response; keep it away from the installed separator. This contact test helps identify a target. It does not reproduce the distance, speed or resistance of a running process.<\/p>\n<p>If loose steel responds strongly, continue with geometry and feed checks. If the response is weak or unclear, use a representative material trial to compare suitable separation methods. Do not classify every stainless steel fragment or rust particle from its appearance alone.<\/p>\n<p>Also define what \u201ciron\u201d means in your result. A laboratory total-iron result includes iron within mineral particles, while a tramp-iron check may count loose steel pieces. Removing bolts can improve equipment protection while leaving mineral-bound iron largely unchanged. Compare the same contaminant fraction and analytical method before and after the correction.<\/p><\/section>\n<section id=\"distance-depth-speed\"><h2>Are distance, burden depth or speed causing the misses?<\/h2>\n<p><strong>Measure the distance to the deepest target, then examine the material layer and speed together.<\/strong> A separator can catch exposed iron while missing similar pieces buried lower in the same load.<\/p>\n<p>For an overhead magnet, record the magnetic working-face reference, conveyor position, normal and maximum material depth, and the cleaning belt or cover between the magnet and product. Use the installation drawing to identify the reference face. Dings&#8217; <a href=\"https:\/\/dingsmagnets.com\/wp-content\/uploads\/2025\/01\/Overhead-Magnet-Selection-Guide-and-General-OH-RFQ-1_25.pdf\" rel=\"nofollow noopener\" target=\"_blank\">overhead magnet selection guide<\/a> treats suspension height, burden depth, belt speed and target size as separate inputs.<\/p>\n<p>Suppose the magnetic face sits 100 mm above the top of a 120 mm material bed. Iron at the bottom is approximately <strong>220 mm from the face<\/strong>, not 100 mm. Any intervening cover or belt must be included consistently in the measurement. This geometry tells you which distance to compare with the supplied design.<\/p>\n<p>Reduce surges and spread material across the effective working zone before moving the magnet. Lowering it requires clearance for the largest lumps, belt motion and captured iron. If material strikes the cleaning belt or magnet face, it can knock iron back into the product.<\/p>\n<p><strong>Do not slow the conveyor while leaving the feed unchanged and assume capture must improve.<\/strong> At the same bulk density and mass flow, a slower belt needs a larger loaded cross-section. The resulting deeper bed may offset the extra time in the magnetic zone. For a controlled comparison, reduce feeder output as needed to hold a comparable bed depth, then record both settings and the missed fraction.<\/p><\/section>\n<section id=\"overband-discharge\"><h2>Why does an overband magnet pick up iron and then drop it?<\/h2>\n<p><strong>If iron lifts but returns to the product, investigate transport and discharge before increasing magnetic strength.<\/strong> The cleaning belt must carry the iron out of the magnetic zone and into a clear collection path.<\/p>\n<p>From a guarded observation point, follow one complete capture-and-discharge cycle. Then isolate the system before inspecting or correcting:<\/p>\n<ul>\n<li><strong>Cleaning belt movement:<\/strong> verify actual travel, direction and tracking. A running motor indication does not establish that the belt is carrying iron away.<\/li>\n<li><strong>Clearance:<\/strong> look for large pieces striking the conveyor edge, burden or nearby structure before they can discharge.<\/li>\n<li><strong>Release point:<\/strong> inspect the chute, bin and any splitter for blockage, rebound or overlap with the clean-product stream.<\/li>\n<li><strong>Material peaks:<\/strong> compare poor periods with surges that reach the magnet or cleaning belt.<\/li>\n<\/ul>\n<p>Eriez&#8217;s <a href=\"https:\/\/www.eriez.com\/Documents\/Literature\/IOMs\/Magnetic-Separation\/SM-308-Eriez-Model-TP-Suspend-Permanent-Magnet-IOM.pdf\" rel=\"nofollow noopener\" target=\"_blank\">Model TP manual, troubleshooting on page 18<\/a> identifies both excessive distance and insufficient clearance as causes of poor results. Installing the magnet lower is therefore not a complete remedy.<\/p>\n<p>On a permanent <a href=\"https:\/\/www.corvelanmag.com\/products\/overband-magnetic-separator\/\">overband magnetic separator<\/a>, electrical power drives the cleaning belt; the magnetic field remains present when that drive stops. A pile of captured iron beneath a stopped belt points to a cleaning failure even though attraction continues.<\/p><\/section>\n<section id=\"dry-drum\"><h2>What should you inspect on a dry magnetic drum?<\/h2>\n<p><strong>Follow the material from the feed point to both outlets: uneven feeding, incorrect magnetic-element position or a misplaced splitter can spoil an otherwise effective capture.<\/strong> For dry bulk material, start with a stable layer across the useful drum width.<\/p>\n<ol>\n<li>Observe whether the feed lands in the intended capture zone or bypasses it at an edge. Break up surges at the feeder rather than allowing a deep pile to cover the drum.<\/li>\n<li>Compare rotation direction and actual speed with the supplied setup. After drive work, check the pulley, gearbox and speed-controller settings that determine drum speed.<\/li>\n<li>Check the stationary magnetic element&#8217;s position against the assembly drawing, especially after shaft or shell work. The rotating shell and stationary magnet have different functions.<\/li>\n<li>Observe where each fraction falls. Stop the machine to adjust the splitter, then restart with guards restored and sample both outlets. An aggressive split may remove more iron while also losing useful product.<\/li>\n<\/ol>\n<p>The <a href=\"https:\/\/www.eriez.com\/Documents\/Literature\/IOMs\/Magnetic-Separation\/SM-340-Eriez-Permanent-Magnetic-Dry-Drum-Separator-IOM1.pdf\" rel=\"nofollow noopener\" target=\"_blank\">Eriez dry drum manual, installation on pages 4\u20136<\/a> describes controlled feeding and adjustment of the divider to the discharge path. Use your own drum&#8217;s speed and element settings rather than copying another model&#8217;s values.<\/p>\n<p>Our <a href=\"https:\/\/www.corvelanmag.com\/products\/dry-drum-magnetic-separator\/\">dry drum magnetic separator<\/a> is intended for controllable dry bulk feed. If wet, sticky material now arrives in lumps, restore the feed condition or review a process suited to that material.<\/p><\/section>\n<section id=\"filter-cleaning\"><h2>Why does a magnetic filter work better just after cleaning?<\/h2>\n<p><strong>A repeatable improvement after cleaning points first to retained iron, restricted flow or material buildup.<\/strong> Track how quickly the working surface loads and when contamination starts passing again.<\/p>\n<p>Captured iron can cover useful collection surfaces, while powder deposits or clumps keep fresh particles farther away. Bunting&#8217;s <a href=\"https:\/\/buntingmagnetics.com\/blog\/necessity-of-cleaning-magnetic-separators\" rel=\"nofollow noopener\" target=\"_blank\">technical article on separator cleaning<\/a> explains how buildup can reduce separation and restrict flow.<\/p>\n<p>Collect the removed material separately at each cleaning. Record operating time, processed material and the missed fraction before cleaning. If performance declines before the scheduled stop, shorten the interval and repeat the comparison. If the iron load has increased sharply, inspect upstream wear or incoming material as well as changing the schedule.<\/p>\n<p>After reassembly, inspect seals, seating and any bypass path. Material that travels around the collection elements receives different treatment from material passing through them. If only one part of the filter loads, examine flow distribution and blockage.<\/p>\n<p>An electromagnetic matrix filter also needs the correct operating sequence. Corvelan&#8217;s <a href=\"https:\/\/www.corvelanmag.com\/products\/high-intensity-magnetic-filter\/\">high-intensity magnetic filter for dry powder<\/a> combines a magnetic matrix with controlled feeding, cleaning and iron discharge. Check that production feed enters during the magnetized capture stage and that the cleaning discharge stays separate from product. Restore the specified matrix and sequence after maintenance; do not replace the matrix with an apparently similar insert.<\/p><\/section>\n<section id=\"magnetic-system\"><h2>When should you suspect the magnetic system itself?<\/h2>\n<p><strong>Investigate the magnetic system when comparable targets are missed under unchanged operating conditions, or when a repeatable measurement differs from its baseline.<\/strong> A changed reading first needs a check of the measurement method.<\/p>\n<p>For a Gauss comparison, repeat the measurement at marked points with the same instrument, probe orientation and gap. For a pull test, use the same test piece, contact condition, spacer and pull direction. Clean the working surface first. Puritan&#8217;s <a href=\"https:\/\/www.puritanmagnetics.com\/inspection-testing\/\" rel=\"nofollow noopener\" target=\"_blank\">separator inspection procedure<\/a> explains why changing the fixture or procedure changes the result. A contact holding-force result and capture at a distance answer different questions.<\/p>\n<h3>Permanent magnetic equipment<\/h3>\n<p><strong>Look for a specific event or physical defect:<\/strong> overheating, severe impact, a damaged enclosure or a shifted assembly. On a drum with a breached shell, iron entering the interior can interfere with the magnetic circuit. Keep the machine out of production if the shell or assembly is damaged; arrange repair rather than opening the magnetic circuit as a trial adjustment.<\/p>\n<h3>Electromagnetic equipment<\/h3>\n<p><strong>Have a qualified electrical technician compare the specified DC supply and operating current with the actual operating state.<\/strong> Record cold and warmed-up conditions, trips and cooling status. A lit control panel or running conveyor does not establish correct coil energization. Eriez&#8217;s <a href=\"https:\/\/www.eriez.com\/Documents\/Literature\/IOMs\/Magnetic-Separation\/SM-328-Eriez-Suspend-Electromagnet-Hazardous-IOM.pdf\" rel=\"nofollow noopener\" target=\"_blank\">SE-700U\/USC troubleshooting guidance, page 13<\/a> separates supply, installation and coil-related causes. Use the values for the installed model; do not increase voltage to compensate for missed iron.<\/p><\/section>\n<section id=\"prove-removal\"><h2>How do you prove that iron removal has improved?<\/h2>\n<p><strong>Compare the same contaminant under recorded production conditions, and measure both missed iron and useful product lost with the reject.<\/strong> More material in the iron bin can mean better capture, more incoming contamination, or more product being discarded.<\/p>\n<ol>\n<li><strong>Define the target.<\/strong> For coarse tramp steel, record the relevant size and shape classes. For fine contamination, use the same preparation and analytical method on every sample. Set the acceptable residual contamination and product loss before comparing settings.<\/li>\n<li><strong>Take corresponding samples.<\/strong> Use designed, safe sampling points at the feed, clean-product outlet and iron discharge. Account for travel time and material held inside the equipment so the samples represent the same production period. Keep containers and sampling tools clean.<\/li>\n<li><strong>Record the conditions.<\/strong> Include material batch, moisture or clumping, feed rate, peak depth, speed, working gap, machine settings and time since cleaning. Use repeat samples across the stream instead of one convenient scoop from the surface.<\/li>\n<li><strong>Change one setting at a time.<\/strong> Return to a stable feed before comparing. If linked settings must change together, such as feeder output and belt speed, record the combination.<\/li>\n<li><strong>Repeat through the difficult condition.<\/strong> Include the normal production load, expected surges and a full cleaning cycle. If contamination appears only farther downstream, sample between machines to locate where it enters.<\/li>\n<\/ol>\n<h3>A free-iron mass-balance example<\/h3>\n<p><strong>For a fully collected batch, free-iron removal is the free iron sent to the reject divided by the free iron entering.<\/strong> Keep this separate from the total weight of the reject.<\/p>\n<p>Suppose a 20 kg trial batch contains 40 g of free iron, measured using the same method throughout. All outputs are collected without loss. The reject weighs 60 g and contains 36 g of free iron; the 19.94 kg product stream contains the remaining 4 g.<\/p>\n<ul>\n<li>Free-iron removal: <strong>36 \u00f7 40 \u00d7 100 = 90%<\/strong>.<\/li>\n<li>Free iron in the reject: <strong>36 \u00f7 60 \u00d7 100 = 60%<\/strong>.<\/li>\n<li>Other material carried into the reject: <strong>60 \u2212 36 = 24 g<\/strong>.<\/li>\n<\/ul>\n<p>The first number describes iron removal. The second describes reject composition. Compare residual iron and product loss with your agreed targets before accepting the setting. For routine samples rather than a fully collected batch, combine stream flow or yield with contaminant concentration to calculate iron mass; a concentration drop alone is a different measure.<\/p>\n<p>For coarse pieces, report captured and missed counts by size class instead of mixing piece counts with grams. Any seeded challenge trial needs a controlled, recoverable test arrangement and protected downstream equipment; never throw test steel into a live production line by hand.<\/p>\n<p>Save the accepted settings, sampling method and before-and-after results with the corrective action. Add the failed item to the relevant startup or maintenance check. Recheck the result after a material change, maintenance or an increase in production rate.<\/p><\/section>\n<section id=\"change-setup\"><h2>When should you change the setup or separator?<\/h2>\n<p><strong>Keep the existing separator when restoring feed, clearance, cleaning or discharge brings the result back within your target. Review another setup when the required material or production rate still fails after those corrections.<\/strong><\/p>\n<p>A conveyor magnet removing large tramp steel and a fine-powder filter solve different jobs. A higher surface Gauss value alone does not make one a substitute for the other. Compare the <a href=\"https:\/\/www.corvelanmag.com\/product-category\/magnetic-separation-equipment\/\">magnetic separation equipment range<\/a> by material movement, target response and the position where separation is practical.<\/p>\n<p>For an overhead installation with too much material above buried iron, review feed spreading or a discharge-point installation. Check support, trajectory and reject collection together. For dry bulk needing a continuous split, consider whether a drum can receive a controlled feed. For fine dry powder, a close-contact matrix filter may fit if the powder flows through it without rapid blockage. Test the changed arrangement at the required output before committing to the final equipment size.<\/p>\n<p>When a magnetic separator is not removing iron, the useful result is a stable reduction in the missed fraction, with acceptable product loss. Restore the failed part of the separation process first, then repeat the production comparison.<\/p>\n<p><strong>Need help narrowing the cause?<\/strong> Use the Message field on our <a href=\"https:\/\/www.corvelanmag.com\/contact-us\/\">contact page<\/a> to send the equipment reference, material, missed-iron size, normal and peak output, operating gap, and when the problem started. Describe the last change before the failure. Use the listed contact channels to share the installation drawing, photos or a safely recorded video. These inputs let us review the material, installation and suitable separator options.<\/p><\/section>\n<section id=\"faq\" class=\"faq\"><h2>Frequently asked questions<\/h2>\n<h3>Why is iron missed on only one side of the conveyor?<\/h3>\n<p><strong>Compare material depth and the working gap across the belt before assuming one side of the magnet has failed.<\/strong> A tilted mounting or off-center feed can give one side a harder job. If geometry and loading are comparable, repeat magnetic measurements at corresponding marked points to investigate a local difference.<\/p>\n<h3>Why did removal worsen after rain or a wetter material batch?<\/h3>\n<p><strong>Inspect clumps and the way material spreads through the capture zone.<\/strong> Iron trapped in sticky material may stay attached to a much larger lump. Compare a contained sample as received with a gently separated sample. If exposing the iron improves capture in a controlled trial, address storage, moisture or feed conditioning before changing the magnetic assembly.<\/p>\n<h3>Can a second pass solve missed iron?<\/h3>\n<p><strong>A second pass can help if it exposes material that was buried or poorly presented during the first pass.<\/strong> Compare the final residual contamination, additional product loss and reduced net production rate. If the target remains locked inside particles or barely responds to the magnet, repeating the same conditions may add little.<\/p>\n<h3>The detector still alarms after magnetic separation. Does that prove the magnet failed?<\/h3>\n<p><strong>No. Recover and identify the alarmed material before assigning the cause.<\/strong> A detector can respond to metal that the installed magnet does not capture, including non-ferrous pieces. Also compare samples immediately after the separator and before the detector to locate contamination introduced between them. A detector alarm by itself does not identify the metal or where it entered.<\/p>\n<h3>Should I replace a magnet if no original test baseline exists?<\/h3>\n<p><strong>First record its present magnetic condition and run a controlled material comparison after correcting visible process problems.<\/strong> Use repeatable measurement points and fixtures. A present-day reading cannot reconstruct an original strength value. If the result still misses your target, use a representative trial to compare repair, relocation or another separator rather than treating age alone as the replacement rule.<\/p><\/section>\n<\/article>\n<script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Why is iron missed on only one side of the conveyor?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Compare material depth and the working gap across the belt before assuming one side of the magnet has failed. A tilted mounting or off-center feed can give one side a harder job. If geometry and loading are comparable, repeat magnetic measurements at corresponding marked points to investigate a local difference.\"}}, {\"@type\": \"Question\", \"name\": \"Why did removal worsen after rain or a wetter material batch?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Inspect clumps and the way material spreads through the capture zone. Iron trapped in sticky material may stay attached to a much larger lump. Compare a contained sample as received with a gently separated sample. If exposing the iron improves capture in a controlled trial, address storage, moisture or feed conditioning before changing the magnetic assembly.\"}}, {\"@type\": \"Question\", \"name\": \"Can a second pass solve missed iron?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A second pass can help if it exposes material that was buried or poorly presented during the first pass. Compare the final residual contamination, additional product loss and reduced net production rate. If the target remains locked inside particles or barely responds to the magnet, repeating the same conditions may add little.\"}}, {\"@type\": \"Question\", \"name\": \"The detector still alarms after magnetic separation. Does that prove the magnet failed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Recover and identify the alarmed material before assigning the cause. A detector can respond to metal that the installed magnet does not capture, including non-ferrous pieces. Also compare samples immediately after the separator and before the detector to locate contamination introduced between them. A detector alarm by itself does not identify the metal or where it entered.\"}}, {\"@type\": \"Question\", \"name\": \"Should I replace a magnet if no original test baseline exists?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"First record its present magnetic condition and run a controlled material comparison after correcting visible process problems. Use repeatable measurement points and fixtures. A present-day reading cannot reconstruct an original strength value. If the result still misses your target, use a representative trial to compare repair, relocation or another separator rather than treating age alone as the replacement rule.\"}}]}<\/script>\n","protected":false},"excerpt":{"rendered":"<p>If your magnetic separator is not removing iron, first find where separation fails: capture, holding, discharge, or contamination added farther down the line. Then compare the missed iron, material depth, working distance and operating conditions with the last acceptable run. Buying a stronger magnet before locating the failure can leave the same problem in place. [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":4267,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-5512","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.corvelanmag.com\/ru\/wp-json\/wp\/v2\/posts\/5512","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.corvelanmag.com\/ru\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.corvelanmag.com\/ru\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/ru\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/ru\/wp-json\/wp\/v2\/comments?post=5512"}],"version-history":[{"count":1,"href":"https:\/\/www.corvelanmag.com\/ru\/wp-json\/wp\/v2\/posts\/5512\/revisions"}],"predecessor-version":[{"id":5603,"href":"https:\/\/www.corvelanmag.com\/ru\/wp-json\/wp\/v2\/posts\/5512\/revisions\/5603"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.corvelanmag.com\/ru\/wp-json\/wp\/v2\/media\/4267"}],"wp:attachment":[{"href":"https:\/\/www.corvelanmag.com\/ru\/wp-json\/wp\/v2\/media?parent=5512"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.corvelanmag.com\/ru\/wp-json\/wp\/v2\/categories?post=5512"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.corvelanmag.com\/ru\/wp-json\/wp\/v2\/tags?post=5512"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}